Features:
- Instruction processing is specified at 30 ns for bit operations and 36 ns for word operations.
- The CPU supports PROFINET IO controller and IO device roles.
- A SIMATIC Memory Card provides load-memory capacity up to 32 GB.
Siemens 6ES7515-2AM01-0AB0 is a standard CPU for modular S7-1500 automation tasks and is not intended for fail-safe logic.
Its processing profile also specifies 48 ns fixed-point and 192 ns floating-point operation times.
The load-memory card, project version, and selected IO controller or IO device role belong to the configured station record.
The Siemens 6ES7515-2AM01-0AB0 SIMATIC S7-1500 CPU 1515-2 PN may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7515-2AM01-0AB0 SIMATIC S7-1500 CPU 1515-2 PN Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Two-Interface Architecture
- X1 interface: PROFINET IRT operates through an integrated two-port switch.
- X2 interface: A separate one-port PROFINET RT path supports an additional network.
- Subnet rule: The IP subnet assigned to X2 must differ from the X1 subnet.
- Device roles: The CPU supports PROFINET IO controller and I-device operation.
Program, Data, and Load Areas
- Program memory: Control code uses 500 KB of work memory.
- Data memory: Data blocks use a separate 3 MB work-memory area.
- Load memory: A SIMATIC Memory Card is mandatory and supports capacities up to 32 GB.
- Bit performance: The documented bit processing time is 30 ns.
Integrated Diagnostic Evidence
- Front status: The display and RUN/STOP, ERROR, MAINT, and LINK RX/TX LEDs expose operating conditions.
- Diagnostic buffer: The CPU stores 3200 entries, including 500 power-failure-proof records.
- Web functions: The integrated Web server supports documented monitoring and service tasks.
- Trace function: Recorded signal traces support event-based analysis without external measurement hardware.
Supply and Installation Limits
- Supply window: The rated 24 V DC input permits 19.2 to 28.8 V DC.
- Horizontal mounting: Operation is specified from 0 to 60 °C.
- Vertical mounting: Operation is limited to 0 to 40 °C.
- Safety boundary: This CPU is not suitable for safety functions.