• ABB·
  • 83SR50C-E·
  • Scarce parts, one inspected order·

After Six On-Site Reviews, a Sudanese Integrator Selects Apter Power for 20 Scarce ABB Components

After Six On-Site Reviews, a Sudanese Integrator Selects Apter Power for 20 Scarce ABB Components
Yuki
Sudanese customer visit and consolidated ABB component order at Apter Power
What the customer needed: a Sudanese system integrator needed nine scarce ABB models after extended manufacturer lead times made its usual direct-purchase route impractical. What made the order difficult: every purchase had to pass the customer's own technical inspection, and Apter Power was being compared with more than ten global suppliers. What Apter Power did: supported five to six on-site reviews over approximately two to three years, prepared the products in advance and answered detailed technical and commercial questions. What happened next: the customer selected Apter Power for one consolidated order covering nine ABB models and 20 components, then returned with a Siemens order.
  • CustomerSudanese system integrator
  • Supply scopeScarce ABB components
  • Order9 models · 20 components
  • Evaluation2–3 years · 5–6 visits

Category: Success Stories · Location: Apter Power, Xiamen, China

9scarce ABB models included in the order
20individual components successfully supplied
5–6on-site customer visits supported
10+global suppliers evaluated by the customer

The customer

The customer is a Sudanese system integrator with extensive experience in ABB automation products. Its technical representative was an engineer with more than ten years of industry experience who had previously purchased frequently and directly from ABB.

The representative could examine detailed physical characteristics, including circuit-board construction and the visible routing of metallic traces and components. A second company representative from another technical field also took part in the wider supplier assessment.

The problem

The required ABB products had become scarce, while official manufacturer lead times no longer matched the customer's project needs. The customer therefore began searching globally for an alternative source.

Availability claims alone were not enough. Every proposed order had to pass the customer's own inspection before purchase, and Apter Power had to demonstrate its capability against more than ten other suppliers.

What was required

Customer type Sudanese system integrator
Brand required ABB industrial automation components
Order scope Nine models and 20 individual components
Availability challenge Scarce products and extended official lead times
Approval condition Customer inspection before purchase
Supplier assessment Inventory, sourcing capability, technical answers, reception and long-term service

What Apter Power did

Prepared physical products for repeated inspection. The team organised the relevant ABB stock before each visit so the customer could review actual units rather than rely on catalogue images or inventory claims.

Supported a long evaluation process. Over approximately two to three years, representatives from two different technical fields visited Apter Power five to six times to inspect products, discuss requirements and assess the company's wider capability.

Combined stock with global sourcing. Apter Power held most of the required products and used its sourcing network to locate additional scarce models needed for the consolidated order.

Kept one person accountable. Yuki Huang coordinated product preparation, customer reception, technical follow-up and communication throughout the evaluation.

Inspection evidence

The available photographs document the prepared ABB products and the customer's on-site inspection. Sensitive customer details and selected label information have been obscured to protect privacy and commercial information.

Sudanese system integrator representative examining an ABB product on site
The experienced technical representative examined individual products and packaging in detail.
Customer documenting the ABB product inspection at Apter Power
Inspection findings and selected product information were documented on site; sensitive written details have been obscured.
Physical review Packaging, visible condition and identifying information
Technical review Circuit-board construction and visible metallic component patterns
Operating checks Where required, products were powered on and relevant operating parameters and software suitability were confirmed
Typical session Approximately two to three hours for the selected products

From evaluation to order

  • Scarcity changed the usual buying routeExtended ABB lead times led the customer to evaluate alternative global suppliers.
  • Inspection became a purchase conditionEach proposed order had to pass the customer's own technical review before approval.
  • Five to six visits built the evidenceTwo representatives assessed products, sourcing capability, technical knowledge and service over approximately two to three years.
  • Apter Power stood outThe customer selected Apter Power from more than ten suppliers after repeated on-site reviews.
  • The order was consolidatedNine ABB models and 20 components were combined into one completed order.
  • The relationship continuedAfter the ABB cooperation, the customer returned with an additional Siemens order.

Why the customer selected Apter Power

  • Most required ABB models were physically available
  • Additional scarce products could be sourced globally
  • Products were prepared before every visit
  • Pre-purchase inspection was fully supported
  • Technical questions received clear answers
  • Communication remained consistent throughout
  • Customer reception was patient and professional
  • Nine models were consolidated into one order

How the order came together

Nine scarce ABB models and 20 components consolidated for the customer order
The consolidated ABB order after stock preparation, targeted sourcing and repeated customer inspection.

Nine ABB models consolidated into one inspected order

Apter Power combined available physical stock with targeted global sourcing, kept the products ready for the customer's on-site reviews and brought the approved items together under one accountable supplier.

  • 0120 components across nine scarce ABB models
  • 02Five to six on-site inspection visits supported
  • 03Physical verification completed before purchase

What the customer said

“Apter Power had most of the required ABB items available, prepared the products for repeated inspection and provided clear technical answers throughout our evaluation. This gave us the confidence to consolidate the order with one supplier.”

— Technical representative, Sudanese system integrator · feedback summarised for privacy

In the words of the project manager

“We built the order model by model—keeping available stock ready, coordinating the hard-to-find items and supporting every inspection until all nine models could be consolidated.”

— Yuki Huang, Operations Director and order owner, Apter Power

The result

The inspected products met the customer's purchasing requirements, allowing the companies to complete an ABB order covering nine models and 20 components after an extensive evaluation.

More importantly, the project demonstrated that Apter Power could support an experienced industrial customer whose decision depended on physical verification, technical scrutiny, sourcing capability and consistent service rather than price alone.

Evidence of continued confidence: after the ABB cooperation, the customer returned to Apter Power with an additional Siemens order.

Parts involved

ABB 83SR50C-E One of the available ABB models included in the inspected order, supported by physical verification before purchase.
Ask about 83SR50C-E

The completed order covered nine ABB models and 20 components. To protect the customer's commercial information, the other model numbers are not published on this page.

Who wrote this, and who checked it

Frequently asked about ABB inspection

Can customers inspect ABB products before purchase?

Yes. When inspection is agreed in advance, Apter Power can prepare the relevant physical products and identifying information for review before the order is confirmed.

What information should be supplied before an inspection visit?

Provide the complete part numbers, quantities and the specific labels, revisions, software details or physical characteristics that need to be checked so the correct products can be prepared.

Can Apter Power consolidate several scarce ABB models?

Yes. Available stock can be combined with targeted sourcing from the global supplier network. In this case, nine models and 20 components were consolidated into one order.

How are sensitive customer and order details protected?

Customer identities and selected commercial or label information can be withheld or obscured. Only the evidence needed to explain the sourcing and inspection process is published.

Does Apter Power support products beyond ABB?

Yes. The follow-up Siemens order in this case shows that the sourcing relationship extended beyond the original ABB requirement.

Can't find the part number you need?

We source thousands of unlisted, obsolete and hard-to-find parts. Enter the part number below and our sourcing team will check availability.

Mon–Fri 09:00–18:00 GMT+8 · Typical response within 2 business hours

Need Help with a Similar Sourcing Challenge?

Send us the part number, quantity and delivery country. Our team will review your requirements and confirm:

  • ✓ Product condition and availability
  • ✓ Lead time and applicable warranty
  • ✓ Shipping options to your destination

For revision, date code or documentation requirements, please include them with your enquiry.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China
Apter Power team verifying industrial automation parts
Straight away
+86 15359408275 Call or WhatsApp. You reach a person, not a queue.
Within minutes
Live chat Message the team during working hours.
Within 2 working hours
Request a quote Send the form and an account manager picks it up.
ISO 9001:2015 certified

Our sourcing, order review and quality-control processes are managed under a certified quality management system.

View certificate

More Sourcing Case Studies

Explore how Apter Power supports industrial parts sourcing through product identification, verification, documentation and delivery coordination.