Features:
- Eight analog input channels for three-wire RTD and resistance signals
- 14-bit conversion for temperature and resistance measurement
- Support for Pt100, Cu10, Ni100 and Ni120 sensors
- S800 I/O diagnostics with compatible module termination units
ABB AI830 3BSE008518R1 is an eight-channel S800 I/O analog input module. It is designed for three-wire resistance temperature detectors and resistance inputs. Four documented RTD families are Pt100, Cu10, Ni100 and Ni120. The module converts these field signals with 14-bit resolution.
ABB AI830 3BSE008518R1 provides filtering and diagnostic functions described in the ABB analog-input documentation. These functions help identify invalid or interrupted measurement paths. Channel configuration must match the connected sensor and wiring method. The selected engineering units and measurement range must also match the application.
ABB AI830 3BSE008518R1 is compatible with TU810, TU812, TU814, TU830 and TU833 termination units. The correct termination unit determines how field wiring is connected to the S800 I/O module. ABB lists a 45 × 102 × 119 mm module size and a 0.2 kg net weight. Sensor wiring and system configuration should be checked before the module is commissioned.
The ABB AI830 3BSE008518R1 Analog Input 1×8 Channels Module can be supported by Apter Power with quotation, official documents and S800 I/O matching guidance. Stock and lead time are subject to confirmation.
ABB AI830 3BSE008518R1 Analog Input 1×8 Channels Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB AI830 3BSE008518R1 Analog Input Module Specs
General
- ManufacturerABB
- ModelAI830 3BSE008518R1
- ConditionNew Original ready stock
- Product FamilyABB S800 I/O
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Supported Measurements
- Connect three-wire RTD field sensors.
- Use Pt100, Cu10, Ni100 or Ni120 sensor types documented by ABB.
- Measure compatible resistance signals with the AI830 input circuitry.
- Match the configured sensor type and range to each connected channel.
Signal Diagnostics
- Use the documented filtering functions for stable input processing.
- Monitor channel diagnostic indications during commissioning and operation.
- Check field wiring when an invalid or interrupted measurement is reported.
- Verify the configured sensor type before replacing hardware.
Installation Notes
- Select a compatible TU810, TU812, TU814, TU830 or TU833 termination unit.
- Follow the ABB three-wire sensor connection instructions.
- Confirm the S800 I/O station configuration before inserting the module.
- Keep sensor wiring and configured measurement ranges consistent.