Product overview:
- 3 m AC 800M controller tool cable
- RJ45 8P8C male to female 9-pole D-sub
- UL2464 26 AWG eight-conductor construction
is an ABB AC 800M serial tool cable used between a PC service interface and supported communication modules for software download or maintenance. ABB identifies the complete article number as 3BSC630197R1.
The 3.0 m cable has an RJ45 8P8C male plug with shell at the controller side and a female 9-pole D-sub connector at the PC side. ABB documents UL2464 26 AWG x 8-conductor construction and an approximate weight of 125 g.
TK212A can connect directly to CI840 or CI840A for supported service operations; CI801 requires additional ABB interface hardware specified for the applicable system release. Verify PC serial-port availability, software version, cable pinout and communication settings before downloading.
Verified resources for ABB TK212A:
Cable Data:
- Cable function: Controller interface and software-download tool cable
- Device-side connector: RJ45 8P8C male plug with shell
- PC-side connector: 9-pole female D-sub
Apply the documented TK212A limits to the complete installation.
Module Match:
- RJ45 8P8C male connector with shell
- Female 9-pole D-sub connector
- 3.0 m cable length and 125 g approximate weight
Confirm every interface and accessory before placing TK212A in service.
Service Check:
- Direct service connection for CI840 or CI840A
- CI801 requires additional ABB interface hardware
- Use only with supported engineering software and serial settings
Record configuration and functional checks for TK212A.
Supply support:
- Complete article: 3BSC630197R1
- In Stock
- Fast Shipping Available
Quote requests should state the CI801, CI840 or CI840A target and available PC serial interface.