Features:
- SPNIS Cnet termination
- Twinaxial or coaxial media support
- Defined cabinet and node cable paths
NTCL01 forms the ABB termination point between a Cnet communication path and the SPNIS network-interface module.
Depending on architecture,
NTCL01 supports coaxial or twinaxial network media and uses documented cable assemblies for the module and inter-cabinet connections.
Successful maintenance of
NTCL01 depends on preserving the whole cable route, including adapters, terminators and the installed network medium.
Availability for NTCL01 is subject to Apter Power's current inventory and sourcing confirmation.
NTCL01 Manuals and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
NTCL01 Communication Termination Unit Specifications
General
- ManufacturerABB
- ModelNTCL01
- ConditionNew Original ready stock
- Product FamilyABB Symphony Plus HR Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Network: terminates the Cnet connection.
- Module: interfaces the path to SPNIS.
- Media: accepts documented coaxial or twinaxial arrangements.
- Topology: retain all adapters and terminators.
- SPNIS cable: NKLS01 or non-PVC NKLS11.
- Cabinet link: select the ABB cable for the installed topology.
- Within cabinet: ABB documents NKTT01 for coaxial links.
- Older plant loop: ABB identifies NKPL01 twinaxial use.
- Medium: record coaxial or twinaxial before removal.
- Segment: identify both connected nodes or cabinets.
- Termination: document all end conditions.
- Restoration: verify network communication after reconnection.