Features:
- Identified in ABB ACV 700 service documentation as a voltage measurement board.
- The product label identifies code 58115479, type SAFT 183 VMC, and hardware revision C.
- Provides printed selector positions for 380, 400, 415, 440, 460, 500, 575, 660, and 690 V.
The
ABB SAFT183-VMC 58115479 is identified in ABB ACV 700 service documentation as a voltage measurement board used in the drive system's SAFUX control section. Its role should be evaluated as part of the installed converter hardware rather than as a general-purpose control card.
The product label identifies code 58115479, type SAFT 183 VMC, and hardware revision C. The PCB also carries connector X1, +UDC and -UDC markings, and selector positions S1-S9 for 380, 400, 415, 440, 460, 500, 575, 660, and 690 V configurations.
ABB documentation does not state that other SAFT boards are universally interchangeable with this version. Replacement review should compare the complete code, hardware revision, connector orientation, mounting-hole layout, DC-bus markings, and existing selector position against the removed board and the applicable ACV 700 service information.
For quotation and matching support, buyers should provide the drive or converter designation, clear photos of both sides of the installed board, the complete label, and the present selector setting. Apter Power can use these details to support technical-documentation review, procurement, and system matching.
Current OEM lifecycle classification is not stated in the available ABB documentation. Availability is confirmed during quotation.
ABB SAFT183-VMC 58115479 Manuals, Datasheets, Drivers, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB SAFT183-VMC 58115479 Voltage Measurement Board Specs
General
- Manufacturer ABB
- Model SAFT183-VMC 58115479
- Condition New Original ready stock
- Product Family ACV 700
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Label Code: The board label shows code 58115479.
- Type and Revision: The label identifies SAFT 183 VMC, hardware revision C.
- Connector Marking: The plug connector is designated X1 on the board.
- DC Bus Markings: The PCB identifies +UDC and -UDC connection points.
- Code Match: Confirm code 58115479 against the removed board and equipment records.
- Revision Match: Verify hardware revision C before treating the board as a direct replacement.
- Selector Match: Record and compare the installed voltage-selector position before removal.
- Board Layout: Compare connector X1, mounting holes, and printed board markings; other SAFT designations are not automatically interchangeable.
- Documented Function: ABB service information identifies SAFT183-VMC as a voltage measurement board.
- Drive Equipment: The board is referenced in ACV 700 frequency-converter service documentation.
- Control Section: The documentation lists the board within the SAFUX control-section hardware.
- Service Handling: Use antistatic handling and follow the applicable ABB service instructions when removing or installing the board.