Features:
- Eight safety inputs and eight test outputs in one ArmorBlock safety unit.
- Test outputs can be assigned as pulse-test or standard pulse outputs.
- DeviceNet communication with a 24 V DC module supply.
1732DS-IB8 brings field safety inputs and test-source functions into a DeviceNet Safety installation.
Its eight test outputs work with the safety inputs; Rockwell’s installation table distinguishes it from the separate IB8XOBV4 module that also has safety outputs.
The 1732DS-IB8 field wiring and safety configuration must be reviewed as part of the machine’s validated safety function.
Apter Power can help review documentation, quotation and sourcing for the Allen-Bradley 1732DS-IB8 DeviceNet Safety ArmorBlock Module.
Allen-Bradley 1732DS-IB8 DeviceNet Safety ArmorBlock Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- 1732DS-IB8 provides eight safety inputs, eight test outputs and no safety outputs in Rockwell’s module-identification table.
- Assign test sources and input channels according to the verified DeviceNet Safety application.
- Do not exchange it with the IB8XOBV4 output-capable variant without re-engineering the safety function.
- Supply the 1732DS-IB8 with the specified 24 V DC power and verify the DeviceNet connection.
- Use the marked detachable I/O connector locations and terminal numbers in the Rockwell installation drawing.
- Record each safety device and its associated test-output channel before removing the original field wiring.
- Match the installed 1732DS-IB8 series, firmware and DeviceNet configuration to the safety controller project.
- Check pulse-test and input diagnostic assignments against the validated safety design before service release.
- After replacement, perform the site-approved functional test of every affected safety input and fault response.
- On-machine collection of eight safety input circuits over DeviceNet Safety.
- Safety-input installations using the module’s eight test outputs for the configured field diagnostics.
- Maintenance of an existing ArmorBlock Guard I/O station with the IB8 identity and validated safety logic retained.