Features:
- Hand-held MicroView form factor for portable local access
- Runtime power delivered through the MicroLogix communication cable
- Optional faceplate kit for a removable surface-mount station
The H in 2707-MVH232 marks the portable MicroView configuration rather than the dedicated fixed-panel catalog.
A service team should decide first whether the terminal will remain hand-held or dock through the optional faceplate, because that choice changes the physical supply scope.
Runtime operation, application recovery, and transfer power are separate service workflows, so success in one does not prove that the others are ready.
Apter Power can coordinate official-document review, quotation, and sourcing support for 2707-MVH232.
2707-MVH232 Hand-Held MicroView RS-232 Operator Interface Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Portable housing: The hand-held catalog does not require enclosure mounting during normal use.
- Surface option: The 2707-MVMNT kit lets the terminal slide into a panel-mounted adapter housing.
- Integrated connection: The adapter includes a cable path between the hand-held connector and panel interface.
- MDPS option: Catalog 2707-NP2 version 1.00 or later supports MicroView application work.
- DPS option: Catalog 2707-NP version 5.00 or later is the documented alternative.
- Transfer cable: The 2707-NC8 connects the MicroView to a PC for upload and download.
- Machine operation: The MicroLogix communications cable supplies terminal power during runtime.
- Computer transfer: A separate DC source must feed the Power Port while the PC cable is used.
- Supply capacity: The external source must meet the documented voltage range and minimum power requirement.
- Portable status access: View MicroLogix process information while moving to the service point.
- Local data entry: Perform application-defined operator input over a direct DF1 connection.
- Removable panel station: Use the optional faceplate kit where a hand-held terminal must dock at the machine.