Features:
- Threaded cylindrical fit: The metal body supports axial adjustment in an established machine bracket.
- Short-range presence role: Diffuse reflection detects the target without a separate reflector at the opposite side.
- Controlled migration path: The OEM names a newer model while retaining circuit review as part of a responsible replacement decision.
BR100-DDT belongs to the earlier Autonics BR cylindrical sensor generation and should be treated as an exact-position spare.
BRQM100-DDTA is an OEM new-type reference, not proof that every installed circuit can be transferred unchanged.
A migration record should preserve the target, bracket position, conductor functions and any multi-sensor series logic.
Apter Power can help identify the Autonics BR100-DDT BR Series Cylindrical Diffuse-Reflective Photoelectric Sensor and coordinate legacy-spare or migration review.
Autonics BR100-DDT BR Series Cylindrical Diffuse-Reflective Photoelectric Sensor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Mounting record: Measure the threaded engagement and target position before disturbing the original adjustment.
- Optical role: Confirm that the installed device is diffuse reflective rather than a visually similar through-beam part.
- Target behavior: Re-test the least reflective product because an aged application may have changed since commissioning.
- Output identity: Preserve the NPN input convention when evaluating any replacement.
- OEM direction: BRQM100-DDTA is the documented newer selection for the legacy BR100-DDT.
- No drop-in claim: Cross-reference status alone does not approve unchanged wiring, timing or mounting.
- Series-circuit warning: Multiple sensors in series need an explicit circuit review before the newer type is accepted.
- Validation scope: Prove both normal detection and fault behavior on the actual controller input.
- Conductor map: Photograph and label supply, common and output conductors before removal.
- Input reference: Confirm the PLC common and NPN current path instead of copying wire colors only.
- Shared logic: Identify whether other sensors participate in the same interlock or series chain.
- Change control: Record a migrated model separately from a like-for-like BR100-DDT replacement.
- Legacy machine sensing: Restores a documented BR100-DDT presence point when an exact service spare is required.
- Cylindrical mounting: Fits machine locations built around threaded axial adjustment.
- Object confirmation: Supports short-range part or carrier presence after target remission is revalidated.
- Planned migration: Provides a controlled basis for evaluating the OEM newer type without claiming automatic compatibility.