Features:
- Single-ended wiring: The sensor’s emitter and receiver share one housing, so only the reflector occupies the far side.
- Relay output: The unit interfaces with relay-based machine logic while retaining selectable operation mode.
- Defined reflector system: The verified sensing distance is tied to the specified reflector and alignment.
BX5M-MFR returns its infrared beam from an MS-2 reflector and detects a target that blocks the optical path.
The one-sided electrical installation can simplify conveyor and machine layouts compared with a through-beam pair.
Stable operation requires the correct reflector, rigid alignment and a target large and opaque enough for the real geometry.
Apter Power can help confirm the Autonics BX5M-MFR Retroreflective Photoelectric Sensor, reflector scope and relay interface before quotation.
Autonics BX5M-MFR Retroreflective Photoelectric Sensor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Sensing method: Confirm the application requires a retroreflective arrangement.
- Rated span: Keep the path within the published distance for the documented reflector.
- Target basis: Check the minimum target size and opacity against the application.
- Terminal format: Verify the panel is designed for the terminal-block housing.
- Rigid opposing mounts: Prevent relative movement between sensor and reflector.
- Centered alignment: Adjust through the stable operating region and lock both brackets.
- Cable entry: Support conductors so terminal force is not transferred to the housing.
- Process test: Prove the smallest and most reflective intended targets at operating speed.
- Surface record: Photograph lens and reflector condition before cleaning.
- Terminal inspection: Check corrosion, looseness and heat damage with power isolated.
- Bracket record: Mark the original sensor and reflector positions before mechanical work.
- Replacement history: Record the exact installed label after service.
- Conveyor presence: Detects cartons or totes with wiring on one side of the line.
- Door monitoring: Senses an opaque flag moving between the unit and reflector.
- Packaging machines: Confirms product passage where a through-beam receiver cable is inconvenient.
- Material handling: Detects pallets and carriers across moderate spans.