- Supports plus or minus 10 V output mode
- Provides two analog output channels
- Requires one separately ordered TB712 terminal block
7AO352.70 is a two-channel 12-bit analog output screw-in module configurable for plus or minus 10 V or 0 to 20 mA signals.
It generates analog setpoints for compatible drives, valves and process devices from a System 2003 CPU.
Before installation or replacement, verify the selected voltage or current mode, load impedance, channel common and polarity, TB712 terminal block, cable shielding, project scaling and safe fallback value.
Availability, condition, price, and shipping time for 7AO352.70 are confirmed during quotation.
B&R 7AO352.70 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supports plus or minus 10 V output mode
- Supports 0 to 20 mA output mode
- Uses 12-bit digital-to-analog conversion
- Provides two analog output channels
- Each channel must be configured for the intended field signal
- Project scaling determines the relationship between engineering value and output signal
- Requires one separately ordered TB712 terminal block
- Load impedance and polarity must match the connected device
- Shielded signal wiring should be separated from motor and switching conductors
- Analog speed or torque setpoints for compatible drive interfaces
- 0 to 20 mA command signals for process actuators
- Plus or minus 10 V reference signals for machine-control equipment