- Provides one RS232 interface
- Baud rate and frame format are set by the machine project
- Use the documented connector pinout
7IF311.7 is a System 2003 screw-in interface module providing one RS232 serial port.
It adds point-to-point serial communication to a compatible System 2003 CPU for a supported external device or service connection.
Before installation or replacement, verify the compatible CPU slot, connector pinout, baud rate, data format, handshake, cable type and length, ground reference and project protocol.
Availability, condition, price, and shipping time for 7IF311.7 are confirmed during quotation.
B&R 7IF311.7 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Provides one RS232 interface
- Installs as a System 2003 screw-in module
- Supports point-to-point rather than multidrop wiring
- Baud rate and frame format are set by the machine project
- The external device protocol must match the application
- Handshake use must match both endpoints
- Use the documented connector pinout
- Keep the serial cable within the approved installation limits
- Check ground reference and routing away from high-noise power conductors
- Point-to-point serial communication with a compatible machine peripheral
- Serial data exchange with a supported barcode reader, scale or operator device
- Service or diagnostic communication where the machine project uses the 7IF311.7 RS232 port