- Adds PROFINET IO controller functionality to a supported X20 host
- Provides two switched shielded RJ45 ports for line cabling
- Supports 100BASE-TX, full duplex, autonegotiation, and Auto-MDI/MDIX
X20IF10E1-1 is a B&R profinet io controller module designed for the X20 System.
The module adds PROFINET IO controller capability to an X20 controller or expandable X20BC1083 and supports bidirectional data exchange with external PROFINET equipment.
Before installation or replacement, verify the complete material number, host compatibility, PROFINET device names and addresses, GSDML and project configuration, topology, cable and segment length, cycle requirements, firmware compatibility, and saved device parameters.
Availability, condition, price, and shipping time for X20IF10E1-1 are confirmed during quotation.
B&R X20IF10E1-1 PROFINET IO Controller Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The module installs in a supported X20 PLC interface slot
- It can also operate in the expandable X20BC1083 POWERLINK bus controller
- Host hardware and Automation Studio support must be verified before installation
- The interface operates as a PROFINET IO controller for connected devices
- Two shielded RJ45 ports are linked through an integrated Ethernet switch
- Each copper segment supports a documented maximum length of 100 meters
- PROFINET device names and addressing must match the controller project
- The correct device-description files and module configuration are required
- Module, network, and data-transfer indicators support commissioning diagnostics
- Integrating third-party PROFINET IO devices into B&R control systems
- Bidirectional process-data exchange between X20 controllers and PROFINET equipment
- Daisy-chain PROFINET installations using the integrated two-port switch