Features:
- API 670-compliant externally mounted proximity probe housing
- Designed for external mounting of a reverse-mount proximity probe
- 3300 XL 8 mm probe with selectable hazardous-area approvals
The 21000 aluminum probe housing design is identified by Bently Nevada as compliant with API 670 requirements for externally mounted proximity probe housings.
This configuration includes a 1.5 in standoff adapter and a specified probe penetration of 2.7 in.
The housing is the 21000 aluminum design. The included 3300 XL 8 mm probe is ordered with selectable hazardous-area approvals; the standard 21000 housing must not be described as a CSA explosion-proof CA21000 enclosure.
Availability and supplied condition of Bently Nevada 21000-28-05-15-027-01-02are subject to confirmation by Apter Power.
Bently Nevada 21000-28-05-15-027-01-02 Proximity Probe Housing Assembly Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 21000-28-05-15-027-01-02 Proximity Probe Housing Assembly
General
- Manufacturer Bently Nevada
- Model 21000-28-05-15-027-01-02
- Apter-listed condition New; availability subject to quotation confirmation.
- Product Family 21000 Proximity Probe Housing Assembly
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- External mounting of a reverse-mount proximity probe.
- Installation where an aluminum 21000 probe housing is required.
- Installations requiring a 1.5 in (38 mm) standoff adapter.
- Applications requiring a specified probe penetration of 2.7 in (approximately 69 mm).
- Use with a properly matched 3300 XL 8 mm transducer system.
- The 21000 housing design complies with API 670 requirements for externally mounted proximity probe housings.
- The included 3300 XL 8 mm probe is ordered with selectable hazardous-area approvals.
- Probe approval does not certify the standard 21000 housing as a CSA explosion-proof enclosure.
- CSA explosion-proof housing certification applies only to properly ordered CA21000 configurations.
- This configuration includes one 3/4-14 NPT explosion-proof fitting and one 3/4-14 NPT plug.
- Hazardous-area approvals must be verified for the complete installed transducer system.
- Provides an all-metal housing for externally mounting and protecting the reverse-mount proximity probe.
- Includes a 0.5 m (20 in) probe cable. Uses a 1.5 in (38 mm) standoff adapter and a 2.7 in probe penetration dimension.
- Probe penetration can be adjusted within a range of 13 mm (±0.5 in).
- Sleeve length must suit the installation location, and the probe lead must be longer than the sleeve.
- Sleeve lengths exceeding 304 mm (12 in) require additional support to reduce vibration.
- Transducer performance depends on the correctly matched probe, extension cable and Proximitor Sensor.
- Signal range, scale factor and accuracy must not be assigned to the housing alone.