330701-00-40-10-02-05

Features:

• Interface Between the Fluid Film Bearing Machine and Non-Contacting Vibration/Displacement Measurement System
• Combines Capability of Extended Linear Range Measurement with 3.94 V/mm Output Precision
• Operates in Conjunction with the 3300 XL 11 mm Extension Cable and 3300 XL 11 mm Proximitor Sensor

The 330701-00-40-10-02-05 operates as the 3300 XL 11 mm Proximity Probe in a 3300 XL 11 mm Proximity Transducer System, providing reliable non-contacting vibration and displacement measurements on fluid film bearing machines. It continuously converts physical proximity variations into precise electrical signals (3.94 V/mm or 100 mV/mil output) through its large 11 mm tip diameter and distributes this measurement data through the Miniature coaxial ClickLoc connector to support steady state operation of all monitoring and diagnostic modules. Seamless integration is standard with the 330701-00-40-10-02-05, however using an optional Redundant Sensor Configuration will allow seamless switchover to a backup probe in the event of a primary sensor failure. The 330701-00-40-10-02-05 has made improvements in several areas over previous 7200-series 11 mm and 14 mm transducer designs in addition to incorporating universal thread compatibility within the 3300 XL monitoring ecosystem.

The 330701-00-40-10-02-05 provides essential measurement functions common to the entire transducer system, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall machinery protection system. One 330701-00-40-10-02-05 probe is required per measurement point depending on the desired monitoring coverage. The 330701-00-40-10-02-05 features a 1/2-20 UNF thread configuration without armor, with an unthreaded length of 0.0 inches, an overall case length of 4.0 inches, and a total length of 1.0 meter (3.3 feet), utilizing standard cable construction with multiple agency approvals.

For Critical Machinery Protection applications, the 3300 XL 11 mm System requires the 330701-00-40-10-02-05 proximity probe installed in conjunction with the 3300 XL 11 mm extension cable and 3300 XL 11 mm Proximitor Sensor. In addition to standard single probe operation, the redundant configuration also performs automatic switchover. The 3300 XL dual transducer configuration executes failover using the internal circuitry specified in the monitoring system options. Using this method, the redundant measurement system continually monitors the health of both probes. If the system detects that the primary 330701-00-40-10-02-05 probe is no longer providing stable output (outside configured linear range/tolerance levels), it will automatically transfer the measurement to the secondary probe and place an event in the System Event List.