Features:
- Extreme Environmental Resilience with Full Armor
- API 670 Compliance & Full Interchangeability
- Corrosion-Resistant ClickLoc Connectivity
The Bently Nevada 330102-00-10-10-01-05 features flexible AISI 302/304 stainless steel armor over an FEP jacket. This construction provides 330 N of pull strength, safeguarding the signal integrity against physical abuse, high vibration, and incidental contact typical in wind turbine gearboxes or steam turbine casings.
Engineered to meet the American Petroleum Institute (API) 670 standard, the Bently Nevada 330102-00-10-10-01-05 guarantees 2mm linear range and high accuracy. It supports complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need for tedious component matching and reducing mean time to repair (MTTR).
Unlike standard threaded connectors, the Bently Nevada 330102-00-10-10-01-05 utilizes gold-plated ClickLoc connectors. They require only finger-tight torque (audible "click" confirmation) and resist loosening due to machine vibration, ensuring a maintenance-free, waterproof seal without special tools.
The 330102-00-10-10-01-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330102-00-10-10-01-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330102-00-10-10-01-05 3300 XL 8 mm Proximity Probe
General
- Manufacturer GE / Bently Nevada
- Model 330102-00-10-10-01-05
- Condition New Original ready stock
- Product Family 330102-00-13-10-02-00,330102-00-80-10-02-00,330102-00-70-10-02-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration Monitoring: The Bently Nevada 330102-00-10-10-01-05 is specifically designed for fluid-film bearing machines (compressors, turbines) to detect shaft vibration relative to the bearing housing, preventing catastrophic rubs.
- Axial (Thrust) Position Measurement: It accurately measures the axial movement of rotating shafts, ensuring that thrust bearings are not overloaded during startup or load changes.
- Keyphasor Reference & Speed: Unlike standard sensors, this probe provides a once-per-turn reference signal essential for synchronous vibration analysis and precise overspeed detection systems.
- Differential Expansion: It monitors the difference in expansion between the rotor and casing in steam turbines, a critical parameter to avoid internal rubbing during thermal transients.
- Extreme Thermal Range: Rated for continuous operation from -52°C to +177°C, the Bently Nevada 330102-00-10-10-01-05 survives direct exposure to hot bearing housings without signal degradation.
- High Humidity Tolerance: It exhibits less than a 3% change in Average Scale Factor (ASF) after 56 days of exposure to 93% relative humidity (IEC 68-2-3), ensuring reliability in coastal or humid power plants.
- Mechanical Robustness: With a tensile strength of 330 N (75 lbf) and a minimum bend radius of just 1 inch, the armored cable prevents kinking and breakage during routing through tight machine casings.
- Fluid Resistance (Viton Seal): The probe tip utilizes a Viton® O-ring to seal differential pressure between the tip and case, preventing oil wicking from the machine interior to the terminal box.
- Backward Compatibility: While current generation, the Bently Nevada 330102-00-10-10-01-05 remains electrically and physically interchangeable with legacy non-XL 3300 5 mm and 8 mm probes, protecting long-term capital investments.
- Required Ecosystem: To function as a full channel, it requires a 3300 XL Proximitor Sensor (e.g., 330180/330181) and a 3300 XL Extension Cable (e.g., 330130). It is not compatible with 7200 series monitors without adapters.
- Hazardous Area Integration: With Approval Code "05," it integrates seamlessly into intrinsic safety (IS) barriers for Zone 0 environments. Safe use conditions require installation per Bently Nevada drawing 141092 (ia) or 140979 (nA/ec).
- Target Material Flexibility: Factory calibrated to AISI 4140 steel. However, the Bently Nevada 330102-00-10-10-01-05 can be recalibrated upon request for other target materials (e.g., 304 SST, titanium), ensuring accuracy regardless of your machine’s metallurgy.