Features:
- Interface Between the Proximity Probe and Industrial Monitoring Systems
- Combines Capability of Vibration Sensing with Armored Mechanical Protection
- Operates in Conjunction with 3300 XL Transducer Systems and Standard Monitoring Equipment
The 330104-00-08-05-01-05 operates as the 3300 XL 8 mm Proximity Probe in industrial rotating equipment applications, providing accurate vibration and displacement measurement capabilities to all connected monitoring systems. It continuously converts mechanical displacement into electrical signals through eddy current technology and transmits this data through the armored cable to support steady state operation of condition monitoring systems. Seamless signal transmission is standard with the 330104-00-08-05-01-05, however using an optional extension cable configuration will allow flexible installation in applications requiring longer cable runs. The 330104-00-08-05-01-05 has made improvements in several areas over previous probe designs in addition to incorporating armored construction and ClickLoc connector technology within the 3300 XL series.
The 330104-00-08-05-01-05 provides essential sensing functions common to the entire monitoring path, and is a critical component of the measurement system, directly affecting the proper, normal operation of the overall vibration monitoring system. One 330104-00-08-05-01-05 probe is required per measurement point depending on the desired monitoring coverage. The 330104-00-08-05-01-05 features an M10 x 1 threaded body with 0 mm unthreaded length and is always installed with the probe tip positioned at the target surface for optimal signal acquisition.
For Multiple Point Monitoring applications, the 3300 XL System requires additional 330104-00-08-05-01-05 proximity probe modules installed at each measurement location. In addition to standard single probe operation, the multi-point configuration also performs synchronized data acquisition. The 330104-00-08-05-01-05 monitoring configuration executes measurements using the internal circuitry specified in the transducer system options. Using this method, the monitoring system continually tracks the health of rotating machinery. If the system detects that the vibration levels exceed configured alarm thresholds (outside acceptable displacement/tolerance levels), it will automatically trigger alerts and place an event in the System Event List.
The 330104-00-08-05-01-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from authorized distributors beyond standard production cycles by the manufacturer (OEM).
Bently Nevada 330104-00-08-05-01-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-08-05-01-05 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-08-05-01-05
- Condition New Original ready stock
- Product Family 330104-00-08-05-01-00,330104-00-08-05-01-CN,330104-00-08-05-11-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Vibration & Position Monitoring: Measuring radial vibration and axial (thrust) position on fluid-film bearing machines.
- Speed & Phase Reference: Acting as a Keyphasor® reference for speed measurements and phase timing.
- Machinery Protection: Real-time monitoring of turbines, compressors, and pumps to detect shaft dynamics and prevent catastrophic failure.
- Standard Operating Temperature: -40°C to +177°C (-40°F to +350°F) for the probe.
- Storage Temperature: -50°C to +204°C (-58°F to +400°F).
- Humidity: High accuracy is maintained even in up to 93% relative humidity (RH).
- Pressure Seal: Sustained exposure below -34°C (-30°F) may cause premature failure of the pressure seal.
- Linear Range: 2 mm (80 mils), typically starting 0.25 mm (10 mils) from the target.
- Sensitivity: Standard Incremental Scale Factor (ISF) of 7.87 V/mm (200 mV/mil) with $\pm$5% to $\pm$6.5% typical accuracy.
- Durability: Patented TipLoc™ and CableLoc™ technologies provide a robust bond and 330 N (75 lbf) pull strength for secure connections in harsh environments.
- Electrical Efficiency: Operates on a -18 VDC to -24 VDC power supply with low supply sensitivity (less than 2 mV change per volt change in input).