Bently Nevada 330101-00-48-50-02-05
Bently Nevada 330101-00-48-50-02-05
Bently Nevada 330101-00-48-50-02-05
Bently Nevada 330101-00-48-50-02-05
Bently Nevada 330101-00-48-50-02-05
Bently Nevada 330101-00-48-50-02-05
Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
How We Verify Your Order
Before dispatch, we confirm the exact model, revision, condition, inspection requirements and shipping documents for your order.
See a real on-site verification case >>

330101-00-48-50-02-05

/ 4.9
1001 reviews | Need a Specific Revision?
Bently Nevada 330101-00-48-50-02-05 is a sensor probe cable used to connect sensors to monitoring equipment. Predict and prevent equipment failure.
Get a quick price for 330101-00-48-50-02-05
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 330101-00-48-50-02-05

  • Manufacturer:
    Bently Nevada
  • Part Number:
    330101-00-48-50-02-05
  • Product Family:
    3300 XL 8 mm Probe
  • Sensing Technology:
    Eddy Current (non-contact)
  • Sensing Diameter:
    8 mm (0.315 in)
  • Measurement Range (Gap):
    0 to 2.0 mm (0 to 80 mils)
  • Sensitivity:
    100 mV/mil (3.94 V/mm) ±5%
  • Output Signal:
    0 to 10 V DC analog signal
  • Response Time:
    < 1 ms
  • Linearity Error:
    ±1% of full scale
  • Repeatability:
    ±0.01 mm (±0.4 mils)
  • Operating Frequency Range:
    0 to 10 kHz
  • Weight:
    0.05 kg
  • Estimated shipping dimensions:
    1.6x1.4x119cm
  • Tariff Code:
    8537101190
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Application Communication and Connectivity Safety

Features:

  • 3/8-24 UNF thread with armor protection provides enhanced mechanical durability for standard English mounting applications in demanding industrial environments.
  • 4.8-inch overall case length with 5.0-meter integral cable combines extended reach for deeper mounting with remote monitoring capability.
  • CSA, ATEX, and IECEx approvals enable global hazardous area deployment without region-specific variants.
The 330101-00-48-50-02-05 features a 4.8-inch overall case length, providing the extended reach needed for installations where the measurement target sits deeper inside the machine casing than standard probes can access. The armor protection shields the probe against crushing, abrasion, and impact damage during installation and operation, making it particularly valuable in applications where cables must be routed through restrictive conduit or where the probe may be subject to rough handling.

The 5.0-meter integral cable on the 330101-00-48-50-02-05 allows the Proximitor sensor to be located in a control cabinet or protected enclosure away from the measurement point, eliminating the need for a separate extension cable. This reduces the number of connections and potential failure points in the monitoring path, while simplifying parts management.

With CSA, ATEX, and IECEx approvals, the 330101-00-48-50-02-05 covers the hazardous area requirements for most industrial regions. A single part number serves a refinery in Texas, a chemical plant in Germany, or an offshore platform in the North Sea, eliminating the need to stock region-specific variants. This simplifies procurement for multinational projects and keeps spare parts inventory lean.

The 330101-00-48-50-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).

Bently Nevada 330101-00-48-50-02-05 3300 XL 8 mm Proximity Probes Manuals, Datasheets, Drivers, Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330101-00-48-50-02-05 3300 XL 8 mm Proximity Probes Specs

General

  • Manufacturer GE / Bently Nevada
  • Model 330101-00-48-50-02-05
  • Condition New Original ready stock
  • Product Family 330101-00-48-50-01-05,330101-00-48-50-11-05,330101-00-48-50-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Heavy-duty turbine machinery: Radial vibration monitoring of steam turbines, gas turbines, and centrifugal compressors.
  • Thrust bearing monitoring: Precisely measuring rotor axial displacement to prevent rotor-stator collisions.
  • Key pump sets and fans: Monitoring the operational stability of high-speed rotating equipment in refineries, chemical plants, and power plants.
  • Physical Connection (ClickLoc™): The probe is equipped with a ClickLoc coaxial connector (code -02) at the end, featuring an anti-loosening design; simply tighten manually to ensure good electrical contact.
  • The -50 in the model number indicates a total cable length of 5.0 meters. It must be connected to a Proximitor sensor (preamplifier) ​​of the corresponding length; otherwise, measurement errors will occur due to capacitance mismatch.
  • Signal Transmission: The probe converts displacement changes into high-frequency electromagnetic interference, which is then converted into a -24 Vdc proportional voltage signal by the preamplifier.
  • Hazardous Area Proved: Complies with ATEX, IECEx, CSA, and other standards. Operates safely in Zone 0, Zone 1, and other explosive hazardous areas (with safety barriers).
  • Functional Safety (SIL): Bentley 3300 XL systems typically meet SIL 2 certification, suitable for highly demanding automated protection interlocking systems (SIS).
  • Mechanical Integrity: Complies with API 670 (American Petroleum Institute's industrial standard for mechanical protection systems), a globally recognized industrial-grade maintenance standard.
Description
The Bently Nevada 330101-00-48-50-02-05 is a high-precision 8mm non-armored eddy current proximity probe from the trusted 3300 XL series, specifically designed for non-contact displacement, vibration, and key phasing measurement of critical rotating machinery in industrial settings.


Featuring an 8mm sensing diameter, M10×1 threaded interface, 48mm housing length (designated by "48" in the model), and a 5.0m standard cable (indicated by "50") terminated with a reliable miniature coaxial ClickLoc connector, this probe delivers exceptional performance with a sensitivity of 100mV/mil (3.94V/mm), an output signal range of 0-10V DC, and a rapid response time of less than 1ms, operating on a power supply of -17.5Vdc to -26Vdc.


Engineered for durability in demanding environments, it offers a wide operating temperature range of -51°C to 177°C, robust construction resistant to oil, dust, and mechanical stress, and seamless integration with Bently Nevada 3300 XL series preamplifiers and machinery protection systems.


Widely utilized across oil & gas, power generation, metallurgy, and chemical industries, it is ideal for monitoring shaft vibration, axial displacement, rotational speed, and key phasing of turbines, compressors, pumps, and fans, complying with API 670 standards for critical machinery protection.


Alternative Names
330101-00-48-50-01-05 330101-00-48-50-11-05 330101-00-48-50-12-05 330101-00-48-50-02-00
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What is the length of the Bently Nevada 330101-00-48-50-02-05 sensor probe cable?
The total length of this sensor probe cable is 1.0 meter.
Does this sensor probe cable comply with any safety standards?
Yes, this sensor probe cable complies with CSA, ATEX, and IECEx approvals.
What is the weight of this sensor probe cable?
This snsor probe cable weighs 0.05 kg.

Product Browsing History