Features:
- TipLoc and CableLoc designs improve mechanical strength and connection reliability
- Optional FluidLoc cable prevents fluid ingress through the cable interior
- Long 5.0 meter cable supports flexible installation across extended distances
Bently Nevada 330104-04-10-50-02-05 delivers reliable proximity measurement in demanding industrial environments where mechanical durability and signal accuracy are critical. The probe is designed to monitor shaft vibration and position by converting displacement into an electrical signal. With a compact probe body and extended cable length, it can be installed in tight machinery spaces while maintaining connectivity to monitoring systems. This flexibility supports a wide range of rotating equipment applications. Continuous measurement allows early detection of mechanical issues, reducing maintenance risks.
In practical use, Bently Nevada 330104-04-10-50-02-05 stands out due to its enhanced mechanical construction. The TipLoc molding method reinforces the probe tip connection, reducing the risk of failure under vibration. At the same time, the CableLoc feature ensures a strong mechanical bond between the cable and probe, withstanding up to 330 N of pulling force. These improvements are especially valuable in high-vibration environments where conventional probe designs may experience wear or detachment. The result is increased operational reliability and longer service life.
Bently Nevada 330104-04-10-50-02-05 also addresses environmental challenges found in industrial machinery. The availability of FluidLoc cable technology helps prevent oil and liquid migration through the cable, which is critical in systems exposed to lubricants or process fluids. Certifications such as CSA, ATEX, and IECEx confirm suitability for hazardous areas. Combined with stable electrical characteristics and secure ClickLoc connectivity, the probe supports consistent monitoring performance. This makes it a dependable solution for modern predictive maintenance strategies.
The 330104-04-10-50-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-04-10-50-02-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-04-10-50-02-05 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330104-04-10-50-02-05
- Condition New Original ready stock
- Product Family 330104-04-10-50-01-05,330104-04-10-50-11-05,330104-04-10-10-02-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Hydrogen Turbine Eccentricity: Vertically mounted on the turbine generator set for monitoring thermal expansion and eccentricity during low-speed turning of the main shaft.
- High-Pressure Pump Vibration: Threaded to the bearing housing of the multi-stage boiler feedwater pump, connected to a preamplifier to capture the radial track vibration of the shaft in real time.
- Turbine Shaft Displacement: Deployed on the thrust bearing side of the high-speed industrial flue gas turbine to monitor axial movement and trigger emergency shutdown.
- Explosion-Proof Zone Speed Measurement: Acts as a key phase sensor on the flywheel side of the refinery compressor, connected to a speed measurement module for phase and speed tracking within the explosion-proof zone.
- High-Frequency Excitation: The probe head generates a high-frequency electromagnetic field through an internal coil, operating continuously under alternating eddy current conditions.
- Linear Distance Measurement: Stable operation with a nominal reference gap of 1.27 mm ensures optimal static and dynamic linearity.
- Pressure-Resistant Sealing: Operates continuously under external differential pressures up to 3.5 MPa at the preamplifier end, preventing leakage of internal media.
- Wide Temperature Range: The probe is resistant to alternating high and low temperatures, operating continuously in extreme industrial environments from -35°C to +200°C.
- Metric Thread: Precise mechanical connection to the probe depth is achieved by directly screwing the M10×1 thread into the machine mounting hole.
- Integrated Cable: Includes a 5.0-meter (50 option) stainless steel armored extension cable for factory-grade long-distance signal physical connection.
- Self-Locking Connector: Utilizes the ClickLoc™ gold-plated miniature coaxial connector at the end for tool-free, vibration-resistant, self-locking connection with the preamplifier.
- Intrinsically Safe Circuit: Connected to the 3500 monitoring system in conjunction with the isolation barrier, completing an electrical safety connection compliant with ATEX/IECEx Ex ia IIC T4 level.