Features:
- 330103-00-05-90-12-00 provides 9-meter unarmored metric probe with M10x1 thread and 50mm case.
- FluidLoc oil-blocking cable with zero unthreaded length for long-distance monitoring applications.
- TipLoc and CableLoc deliver 330N pull strength with gold ClickLoc connectors for reliable monitoring.
The 330103-00-05-90-12-00 is specifically configured for applications requiring extended cable length between the probe and the Proximitor sensor, with a total length of 9.0 meters (29.5 feet) designed to pair exclusively with 9-meter Proximitor sensors (330180-90 panel mount, 330180-91 DIN mount, or 330180-92 no mounting hardware). The FluidLoc cable technology is a critical feature that seals the cable interior, preventing oil and other industrial fluids from migrating through the conductor bundles and leaking out at termination points. This is essential for steam turbine, gas turbine, and compressor installations where probe cables pass through oil-filled bearing housings.
The 330103-00-05-90-12-00 is supplied without armor, making it lighter and more flexible than armored versions. This unarmored construction is suitable for installations where the cable is protected by conduit or routed through protected cable trays where mechanical damage is not a concern. The absence of armor reduces the cable's outer diameter and weight, making it easier to route through tight spaces and conduit systems.
The 330103-00-05-90-12-00 incorporates multiple patented design features for maximum durability in harsh industrial environments. TipLoc molding creates a permanent, robust bond between the probe tip and the probe body, eliminating a common failure point found in older designs where the tip could become loose or separate due to vibration or thermal cycling. This is especially critical in high-vibration applications such as gas turbines, steam turbines, and high-speed compressors. CableLoc technology secures the probe cable with 330 N (75 lbf) pull strength, preventing accidental disconnection during installation or machine operation.
The 330103-00-05-90-12-00 Bently Nevada Proximity Probe may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330103-00-05-90-12-00 Proximity Probe Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330103-00-05-90-12-00 Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330103-00-05-90-12-00
- Condition New Original ready stock
- Product Family
330103-00-05-90-12-05,330103-00-05-90-12-CN,330103-00-05-90-12-RU
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Fluid-Film Bearing Machinery: Installed on assets like steam and gas turbines, centrifugal compressors, turbofans, and large process pumps to monitor shaft health within their hydrodynamic journal bearings.
- Radial Vibration Monitoring: Tracks the real-time dynamic motion (orbit) of the shaft, detecting structural anomalies such as unbalance, shaft misalignment, or bearing wear.
- Axial Position (Thrust) Displacement: Measures the axial movement of the rotor relative to the thrust bearing casing, preventing catastrophic metal-to-metal contact between the rotor blades and stator.
- Keyphasor & Speed Detection: Targets a keyway or notch on the spinning shaft to provide a precise once-per-turn pulse signal used for calculating rotational speed (RPM) and phase angles during diagnostic balancing.
- 9.0-Meter Direct Loop Interconnect: Because this probe has a -90 (9.0-meter) total integrated cable length, it must connect directly to a 9.0-meter 3300 XL Proximitor Sensor. Do not use an extension cable. Modifying the total physical length changes the loop impedance, corrupts the system's standard linear scale factor (-200 mV/mil or 7.87 V/mm), and ruins measurement accuracy.
- FluidLoc Cable Seal (-12 Option): This configuration utilizes Bently Nevada’s proprietary FluidLoc design. The inner core of the cable is physically sealed to prevent lubricating oil, water, or process gases from leaking out of the machine housing through the interior voids of the cable.
- ClickLoc Mechanical Connection: The cable terminates in a miniature gold-plated coaxial ClickLoc connector. It is engineered with an explicit locking mechanism that clicks into place to prevent connection loss caused by high machine vibration.
- Industrial Standard Compliance: The 3300 XL 8 mm system complies with the strict technical specifications outlined in the API 670 (American Petroleum Institute) standard for Machinery Protection Systems. This makes it globally accepted for mission-critical monitoring loops in petrochemical plants and oil refineries.
- Hardware "OK" Diagnostic Circuit: The system maintains continuous safety loop supervision. The Proximitor Sensor monitors the constant DC bias voltage of the probe. If a short-circuit, open-loop, or wire break occurs, the system flags a "NOT OK" hardware fault state. This locks out the affected channel in the rack monitor, avoiding accidental machine shutdown caused by a broken cable (false trip prevention).
- Agency Approvals (-00 Option): This specific -00 configuration means no specialized hazardous area approvals (such as ATEX, IECEx, or Class I Division 1 certifications) were requested at ordering. It is strictly предназначен for standard, non-hazardous industrial zones.