Features:
- Stainless steel armored construction provides mechanical protection against crushing, abrasion, and impact damage.
- Patented TipLoc and CableLoc technologies deliver 330 N pull strength and robust probe tip bonding.
- Compatible with standard and ETR components, with optional FluidLoc cable for fluid containment.
The 330130-045-01-00 wraps its 4.5-meter length in stainless steel armor. This protects the cable against crushing when routed through conduit, abrasion from contact with sharp edges, and impact damage during installation. For facilities where standard cables fail due to mechanical abuse, this armored cable delivers long-term reliability. The armor does not compromise flexibility—the cable still routes through standard cable trays and junction boxes. When combined with the optional FluidLoc cable option, the 330130-045-01-00 also blocks oil migration through the cable interior.
TipLoc molding bonds the probe tip to the body, preventing separation under vibration. CableLoc provides 330 N pull strength, keeping the cable attached even during rough pulls. These patented features are factory-engineered, not field-applied. The 330130-045-01-00 arrives ready to withstand the mechanical stresses of installation and operation. For maintenance teams, this means fewer failures caused by loose connections or detached cables. The gold-plated ClickLoc connectors lock with finger-tight torque, staying secure without tools.
The 330130-045-01-00 works with standard 3300 XL Proximitor sensors and probes. For high-temperature applications, ETR probes (218°C) and ETR cables (260°C) are available separately. The 330130-045-01-00 itself is rated for standard temperatures up to 177°C, but it is fully compatible with ETR components. Note that using any ETR component limits system accuracy to ETR specifications. For lubricated machinery, specify the optional FluidLoc cable to prevent oil from wicking through the cable interior. This flexibility allows the same basic cable to serve a wide range of applications.
The 330130-045-01-00 Bently Nevada Extension Cable may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330130-045-01-00 Extension Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330130-045-01-00 Extension Cable Specs
General
- Manufacturer GE / Bently Nevada
- Model 330130-045-01-00
- Condition New Original ready stock
- Product Family
330130-070-01-00,330130-075-01-00,330130-045-03-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Signal Transmission Bridge: Leads the signal from the probe installed inside the machine to the external protective box (preamplifier mounting location).
- Large Rotating Machinery Monitoring: Used for vibration and displacement monitoring of steam turbines, compressors, fans, and pumps.
- Harsh Environmental Areas: This model uses FEP (fluorinated ethylene propylene) insulation, which has excellent oil resistance, chemical corrosion resistance, and high-temperature resistance, making it suitable for installation in oily environments in petrochemical and power facilities.
- ClickLoc™ Connector Protection: The gold-plated connectors feature an automatic locking function to prevent poor contact caused by mechanical vibration. This is the primary protection against spiking.
- System OK Diagnosis: When a cable experiences an open or short circuit, the connected 3500 monitoring system will detect a voltage deviation from the normal range (e.g., exceeding -2V to -18V DC) and immediately trigger a "NOT OK" status to prevent false alarms due to cable faults.
- Optional Protection: -00 in the code indicates no stainless steel armor. If used in areas susceptible to mechanical damage, the armored (-02) model is usually selected to provide additional physical protection.
- Length Matching: This model has a length of 4.5 meters (45). Ensure that the probe length + extension cable length = the total system length specified by the preamplifier (typically 5.0 or 9.0 meters), otherwise measurement errors will occur.
- Connector Insulation: Use connector protectors during installation to prevent the connectors from contacting the housing ground, which could cause grounding loop interference.