Features:
- Eight-metre extension: The cable adds 8.0 m between the probe lead and Proximitor sensor.
- Standard construction: The flexible cable is not an armored routing option.
- Protected connector joint: Option 02 supplies a connector protector at the detachable connection.
Length role: The extension length combines with the probe lead to create the transducer system’s selected total length.
Routing role: Standard construction suits protected cable routes where continuous armor is not required.
Ordering role: The 00 suffix identifies a cable without the agency-approval option.
Apter Power supports Bently Nevada 330130-080-02-00 3300 XL 8 mm extension cable sourcing with quotations, technical documentation and configuration review.
Bently Nevada 330130-080-02-00 3300 XL 8 mm extension cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Length selection: Code 080 provides an 8.0 m extension segment.
- Standard jacket: The selected construction remains flexible and unarmored.
- System cable: Its electrical characteristics belong to the 3300 XL 8 mm transducer system.
- Connection role: The cable links a compatible probe lead to the corresponding Proximitor sensor.
- Protector included: The 02 option adds protection around the connector joint.
- Local protection: The protector covers the connection rather than the full cable run.
- Mating requirement: Both cable ends still depend on the correct 3300 XL connector style.
- Routing boundary: The protector does not replace cable armor where mechanical protection is required along the route.
- Nine-metre build: An 8.0 m extension pairs with a 1.0 m probe lead for the nominal 9 m chain.
- Matched electronics: The Proximitor sensor must correspond to the completed system length.
- Performance boundary: Electrical length is part of the measurement response, not only a mechanical routing value.
- Family mixing: Any permitted XL/non-XL combination operates to the non-XL performance specification.
- Long probe runs: The extension cable bridges machinery probes to remotely mounted monitoring electronics.
- Protected connector joints: Its protector suits installations where the detachable joint needs local mechanical coverage.
- Nine-metre channels: The 8.0 m segment supports documented 9 m systems when combined with the appropriate probe lead.
- Maintenance spares: The full code allows the cable construction and approval status to be sourced accurately.