Features:
- Interface Between the Machine Surface and 3300 NSv Proximitor® Sensor System
- Combines Capability of Displacement Detection with Extended Housing Protection
- Operates in Conjunction with the 3300 NSv Transducer System and Standard 3500 Monitoring System
The 330901-00-90-10-02-05 operates as the NSv Proximity Probe in a 3300 NSv transducer system, providing reliable displacement measurement of rotating machinery components. It continuously detects eddy current variations across 0.5 to 2.5 mm linear range while maintaining signal accuracy through PPS probe tip and non-armored cable construction. Seamless signal transmission is standard with the 330901-00-90-10-02-05, however using an optional CableLoc™ design will ensure 220 N (50 lb) pull strength at the connection point in demanding industrial environments. The 330901-00-90-10-02-05 has made improvements in several areas over previous RAM probe designs in addition to incorporating 9.0 inch extended housing capability within the 3300 NSv system.
The 330901-00-90-10-02-05 provides essential sensing functions common to the entire transducer system, and is a critical component of the measurement path, directly affecting the accuracy and reliability of the overall vibration monitoring system. One 330901-00-90-10-02-05 probe is required per measurement channel depending on the desired monitoring point. The 330901-00-90-10-02-05 occupies no rack slots and is always mounted directly on the machine bearing housing (typically in a 1/4-28 UNF threaded mounting position with 5.1 N·m installation torque).
For complete system operation, the 3300 NSv system requires the 330901-00-90-10-02-05 proximity probe to convert mechanical displacement into electrical signals. In addition to standard vibration measurement, the 330901-00-90-10-02-05 configuration also performs wide temperature operation. The 330901-00-90-10-02-05 probe assembly executes environmental protection using the -52°C to +177°C temperature rating specified in the probe specifications. Using this method, the proximity probe continually guards against extreme thermal conditions. If the system detects that the probe signal is compromised (outside configured sensitivity of 7.87 V/mm or resistance tolerance of 7.45 Ω ± 0.50), it will indicate a fault condition in the monitoring system and require probe inspection.
The 330901-00-90-10-02-05 Bently Nevada NSv Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330901-00-90-10-02-05 NSv Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330901-00-90-10-02-05 NSv Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330901-00-90-10-02-05
- Condition New Original ready stock
- Product Family 330901-00-90-10-02-00,330901-00-90-10-02-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Tight Installation Spaces: Specifically engineered for environments where counter-bore or side-view restrictions prevent the use of standard 5mm or 8mm probes.
- Small Target Monitoring: Ideal for measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).
- Machinery Protection: Commonly used in centrifugal and axial compressors, pumps, and small turbines.
- Linear Range: 1.5 mm (60 mils), typically starting 0.25 mm (10 mils) from the target.
- Connection Reliability: Features ClickLoc™ connectors which lock into place to prevent loosening due to vibration.
- Scale Factor: Average Scale Factor (ASF) of 7.87 V/mm (200 mV/mil).
- Robust Construction: The TipLoc™ molding method and CableLoc™ design provide up to 220 N (50 lb) of pull strength.
- Operating Temperature: -34°C to +177°C (-30°F to +351°F).
- Storage Temperature: -51°C to +177°C (-60°F to +351°F).
- Materials: AISI 304 stainless steel (SST) case for corrosion resistance and Polyphenylene sulfide (PPS) tip for thermal stability.
- Relative Humidity: 100% condensing; non-submersible but resistant to damp heat when connectors are protected.
- Chemical Resistance: The probe tip and FEP cable insulation are designed to withstand exposure to most industrial lubricants and chemicals.