Features:
- Advanced Small-Target Optimization for Confined Machinery Spaces
- Patented CableLoc™ Mechanical Bonding for High-Stress Longevity
- Gold-Plated ClickLoc™ Connection Mechanisms to Prevent Signal Drift
The physical footprint of this probe allows precise shaft metrics where standard 8mm probes face clearance limits. The Bently Nevada 330905-00-18-05-02-00 is specifically engineered to overcome counterbore restraints and severe side-view proximity limitations, unlocking accurate condition monitoring on narrow fluid-filmed bearings and downsized rotor profiles.
Eliminates the primary failure point found in lower-tier proximity sensors where the lead cable snaps under strain. The Bently Nevada 330905-00-18-05-02-00 utilizes an ultra-robust TipLoc molding combined with a patented CableLoc connection, allowing the assembly to withstand up to 220 N (50 lb) of continuous pull force without degrading the raw electrical signal.
3Guarantees unbroken signal pathways back to the machine protection system in high-vibration environments. The Bently Nevada 330905-00-18-05-02-00 incorporates premium gold-plated brass ClickLoc connectors that securely latch into position, preventing standard coaxial terminations from backing out or developing intermittent impedance issues.
The 330905-00-18-05-02-00 Bently Nevada 3300 NSv Proximity Probes may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330905-00-18-05-02-00 3300 NSv Proximity Probes Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330905-00-18-05-02-00 3300 NSv Proximity Probes
General
- Manufacturer GE / Bently Nevada
- Model 330905-00-18-05-02-00
- Condition New Original ready stock
- Product Family 330905-00-18-05-02-05,330905-00-18-05-02-CN,330905-00-10-10-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Centrifugal Air and Process Gas Compressors: The Bently Nevada 330905-00-18-05-02-00 is predominantly deployed inside small-scale compressors where space around the fluid-filmed bearing housings is severely limited.
- Industrial Refrigeration Units: Ideal for monitoring tight internal cooling pump shafts and specialized hermetic compressors prone to quick thermal shifts.
- Small Steam and Hydro Turbines: Used to capture high-velocity shaft motion profiles where larger standard 8mm sensor tips cannot clear counterbore constraints.
- High-Speed Turbochargers & Marine Machinery: Deployed across compact turbo-machinery and auxiliary pumps requiring small-target validation on shafts smaller than 51 mm (2.0 inches).
- Extreme Sub-Zero to High-Heat Tolerances: The Bently Nevada 330905-00-18-05-02-00 maintains structural integrity across an environment envelope of -52°C to +177°C, allowing it to survive hot lubricating oils or cold process gas extraction points.
- Aggressive Process Chemical Resistance: Outfitted with an advanced Polyphenylene Sulfide (PPS) tip, the sensor is immune to corrosive chemical vapor exposure and harsh synthetic machine oils.
- High-Condensation Submergence Protection: When the core ClickLoc™ connections are sealed with recommended connector protectors or silicone self-fusing tape, the probe assembly tolerates a 100% condensing humidity environment./span>
- Differential Housing Pressure Containment: Constructed with built-in Viton O-rings, the probe case prevents process fluids or gasses from escaping through the sensor mounting tap holes.
- Radial Dynamic Vibration Mapping: The Bently Nevada 330905-00-18-05-02-00 feeds real-time radial shaft displacement signals directly into 3500-series machinery protection panels to identify unbalance or misalignment.
- Axial Position and Thrust Monitoring: Provides micro-inch tracking of thrust collar movement to protect internal turbine impellers from experiencing catastrophic housing collisions.
- Tachometer and Zero-Speed Verification: Delivers crisp pulse-train data on small multi-tooth target gears for overspeed tripping mechanisms and speed tracking.
- Keyphasor® Phase Referencing: Relays highly accurate once-per-turn timing pulses from shaft notches, providing critical phase lag angles for advanced vibration diagnostics.