Features:
- Interface Between the Proximity Measurement System and Machinery Protection System
- Combines Capability of 8 mm Proximity Sensing with Standard Thread Mounting Configuration
- Operates in Conjunction with the 7200 Series and Standard Bently Nevada Monitoring Systems
The 21504-012-032-10-02 operates as the Standard Proximity Transducer Probe in a 7200 system, providing reliable displacement measurement for rotating machinery monitoring applications. It continuously detects target surface proximity with an 8 mm diameter sensing tip and transmits the signal through a 1.0 metre (39 inches) integral cable, with tolerance of +.25 metre, -.10 metre (+10 inches, -4 inches), to support steady state operation of all monitors and modules within the protection system. Seamless signal transmission is standard with the 21504-012-032-10-02, however using an optional extension cable configuration will allow flexible routing to the monitor input in the event of installation constraints. The 21504-012-032-10-02 has made improvements in several areas over previous transducer designs in addition to incorporating 3/8-24 standard mounting threads within the 7200 system.
The 21504-012-032-10-02 provides essential sensing functions common to the entire measurement path, and is a critical component of the monitoring loop, directly affecting the proper, normal operation of the overall protection system. One 21504-012-032-10-02 probe is required per measurement point depending on the desired monitoring coverage. The 21504-012-032-10-02 occupies a minimal mounting footprint with an unthreaded length of 1.2 inches and overall case length of 3.2 inches and is always located at the measurement position (the dedicated sensing point on the machine casing)..
For Flexible Installation applications, the 21504-012-032-10-02 system accepts the miniature male coaxial connector option installed at the cable termination. In addition to standard signal transmission, the connectorized configuration also performs reliable electrical interface. The 21504-012-032-10-02 connector system executes signal transfer using the miniature coaxial interface specified in the connector options. Using this method, the connectorized probe system continually maintains signal integrity from the sensing tip to the monitor input. If the system detects that the 21504-012-032-10-02 is properly installed with the 3/8-24 threads and 1.0 metre cable, it will automatically establish the measurement channel and place the transducer in the active monitoring configuration.
The 21504-012-032-10-02 Bently Nevada 7200 Proximity Transducer Probe may still be available for purchase and support from authorized distributors beyond standard production cycles by the manufacturer (OEM).
Bently Nevada 7200 Proximity Transducer System 21504-012-032-10-02 Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 21504-012-032-10-02 7200 Proximity Transducer System
General
- Manufacturer GE / Bently Nevada
- Model 21504-012-032-10-02
- Condition New Original ready stock
- Product Family 21504-012-032-10-00,21504-012-032-05-02
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.