Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Configuration verification required

    Current OEM lifecycle and orderability of this exact configuration require verification.

    Apter Power can provide 9200-01-02-02-00 subject to confirmation of configuration and availability.

9200-01-02-02-00

/ 4.9
1001 reviews | Need a Specific Revision?
9200-01-02-02-00 is a Bently Nevada Seismoprobe velocity transducer with a moving-coil sensing element. This two-wire transducer generates a voltage proportional to vibration velocity and does not require external power.
In Stock
Ships by Friday, October 30
Fast Shipping Available
Get a quick price for 9200-01-02-02-00
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 9200-01-02-02-00

  • Manufacturer:
    Bently Nevada
  • Part Number:
    9200-01-02-02-00
  • Product Family:
    Bently Nevada
  • Product Type:
    Seismoprobe Moving-Coil Velocity Transducer
  • Stock:
    1
  • Sensing principle:
    Moving-coil velocity transducer
  • Voltage sensitivity:
    20 mV/mm/s (500 mV/in/s), ±5% with 10 kΩ load
  • Operating orientation:
    0° ±2.5°
  • Frequency option:
    4.5 Hz
  • Mounting:
    Circular base, 1/4-28 UNF stud
  • Connector location:
    Side-mounted
  • Operating temperature:
    -29°C to +121°C
  • Approval option:
    00 - not required
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Config Details Matching Install
  • 9200-01-02-02-00 is a Bently Nevada Seismoprobe velocity transducer with a moving-coil sensing element. This two-wire transducer generates a voltage proportional to vibration velocity and does not require external power.
  • Mount on a suitable rigid surface in the specified orientation.
  • Sensing principle: Moving-coil velocity transducer
  • Voltage sensitivity: 20 mV/mm/s (500 mV/in/s), ±5% with 10 kΩ load
  • Operating orientation: 0° ±2.5°
  • Frequency option: 4.5 Hz
  • Mounting: Circular base, 1/4-28 UNF stud
  • Connector location: Side-mounted
  • Operating temperature: -29°C to +121°C
  • Approval option: 00 - not required
  • Mount on a suitable rigid surface in the specified orientation.
  • Verify cable polarity and monitor input impedance.
  • Check temperature and certification requirements for the complete installation.
  • Confirm the complete nameplate before installation.
  • Check mechanical fit, cable routing and environmental conditions.
  • Verify applicable approvals and complete measurement-channel operation.
Description

9200-01-02-02-00 is a Bently Nevada Seismoprobe velocity transducer with a moving-coil sensing element. This two-wire transducer generates a voltage proportional to vibration velocity and does not require external power.

The ordering configuration specifies 0° ±2.5° orientation, the 4.5 Hz frequency option and a circular base, 1/4-28 unf stud. Verify the installed orientation, connector wiring and monitor input loading before use.

Approval option 00 does not request agency approvals. Establish installation suitability separately.

Alternative Names
9200-01-02-02-00 9200 01 02 02 00 Bently Nevada 9200-01-02-02-00 Baker Hughes 9200-01-02-02-00 9200-01-02-02-00 technical data 9200-01-02-02-00 Seismoprobe Moving-Coil Velocity Transducer 9200-01-02-02-00 replacement reference 9200-01-02-02-00 configuration
Technical notes
Mount on a suitable rigid surface in the specified orientation. Verify cable polarity and monitor input impedance. Check temperature and certification requirements for the complete installation.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Does it require external power?
No. The moving-coil element generates its output voltage.
What is the nominal sensitivity?
20 mV/mm/s (500 mV/in/s), ±5% with 10 kΩ load.
Which orientation is specified?
0° ±2.5°.
Which frequency option is selected?
4.5 Hz. Check the complete response curve for the actual orientation.
How is the unit mounted?
Circular base, 1/4-28 UNF stud.
Where is the connector?
Side-mounted.
What operating temperature applies?
-29°C to +121°C. Check cable ratings separately.
Can another orientation be substituted?
Check the manufacturer’s response curves and installation requirements before substituting an orientation option.

You May Also Like