Product overview:
- 30 ft (9.14 m) cable for 9200 and 74712 Seismoprobe velocity transducers
- High-temperature armored interconnect cable
- Moisture-resistant two-socket sensor connector with terminal-lug monitor end
84510-30 is a 30 ft (9.14 m) high-temperature armored interconnect cable for carrying the two-wire velocity signal from a compatible 9200 or 74712 Seismoprobe to monitoring hardware.
The assembly uses twisted shielded 22 AWG conductors, a moisture-resistant two-socket female connector at the sensor end and terminal lugs at the monitor end. Its documented temperature range is -29 to +260 degrees C.
Route the cable away from abrasion, excessive bending, high-energy conductors and moisture entry points. Verify length, connector keying, shield termination and receiving-channel requirements before installation.
Verified resources for Bently Nevada 84510-30:
Configured ordering fields:
- 84510: cable construction family
- 30: 30 ft (9.14 m)
- Standard 30 ft cable length
Use the complete 84510-30 reference when checking the nameplate, certificate or replacement request.
Cable details:
- High-temperature armored interconnect cable
- Two-conductor twisted shielded 22 AWG
- Operating range: -29 to +260 degrees C
These details apply to the complete 84510-30 configuration and should be verified against the supplied unit.
Compatibility and matching:
- Match a compatible 9200 or 74712 sensor
- Verify sensor connector and monitor terminal arrangement
- Confirm route length before ordering
Do not substitute 84510-30 until the mechanical, electrical and approval requirements have been matched.
Installation checks:
- Protect the minimum bend radius
- Terminate shield according to the system drawing
- Test continuity and channel response
Record mechanical, wiring and functional verification after installing 84510-30.