Features:
- Provides a separate 150 W, 12 V DC redundant-power path for a supported non-PoE switch.
- Accepts a universal 100–240 V AC, 50–60 Hz mains input.
- Operates standalone or in the STK-RPS-150CH2 and STK-RPS-150CH8 shelves.
- Uses a 19.6x5.2x25.7 cm enclosure with an unpackaged mass of 1.75 kg.
Enterasys STK-RPS-150PS separates the backup supply path from the switch internal AC power source.
The module converts its universal mains input to the 12 V DC redundant-power connection required by the supported switch.
Standalone and shelf-mounted arrangements use the same supply module while changing how multiple units are physically organized.
The Enterasys STK-RPS-150PS 150 W DC Redundant Power Supply Module may still be available through Apter Power after OEM discontinuation.
Enterasys STK-RPS-150PS 150 W DC Redundant Power Supply Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
From mains input to redundant DC output
- Mains input: The supply accepts 100–240 V AC at 50–60 Hz.
- DC output: The module provides a 12 V DC redundant-power path.
- Output boundary: Available redundant power is limited to 150 W.
- Independent source: The RPS path remains separate from the switch internal AC supply.
Ways to organize one or more supplies
- Standalone use: One module can serve one supported switch without a rack shelf.
- Two-slot shelf: STK-RPS-150CH2 accepts up to two modules.
- Eight-slot shelf: STK-RPS-150CH8 accepts up to eight modules.
- Per-switch path: Each installed module retains its own switch power connection.
Conditions for a valid switch connection
- Load type: The documented application is a supported non-PoE fixed switch.
- Cable match: Use the redundant-power cable specified for the connected switch.
- Power budget: Keep the connected load within the 150 W output rating.
- Legacy records: Check C2RPS-PSM when reviewing older product documentation.
Physical and electrical checks before energizing
- Clearance: Allow space for the 19.6x5.2x25.7 cm supply body and cable bend.
- Module mass: Support the 1.75 kg unpackaged module during installation.
- AC source: Confirm the source remains inside 100–240 V AC and 50–60 Hz.
- Model identity: Match the complete STK-RPS-150PS catalog number.