Features:
- Extends a compatible DeltaV carrier connection by 1.2 metres within the cabinet layout.
- Uses the specified 44-pin connector arrangement for the carrier-to-carrier LocalBus path.
- Forms the bottom extender assembly in the supported DeltaV carrier configuration.
The current ordering configuration is KJ4002X1-BF2, the DeltaV 1.2 m Bottom Extender Cable Assembly documented by Emerson for DeltaV M-Series Horizontal Carriers.
KJ4002X1-BF2 is used in Extending DeltaV horizontal-carrier LocalBus connections by 1.2 m. Its system role and configuration limits must remain aligned with the official specification.
Before commissioning KJ4002X1-BF2, verify the installed assembly, project wiring, power, software and environmental conditions that apply to this exact part number.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ4002X1-BF2:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Extends DeltaV horizontal-carrier LocalBus wiring by 1.2 metres between compatible cabinet sections.
- Supports layouts that separate I/O carriers while remaining within the specified bus-length limit.
- Replaces an installed bottom extender when both cable length and connector arrangement match.
- De-energize the system before disconnecting the extender cable.
- Connect BF2 only at the bottom extender position defined by the carrier layout.
- Secure the 1.2 m cable without exceeding its bend or routing space.
- Keeps the cable assembly functional across its rated -40 to +70°C ambient range.
- Maintains operation at 5 to 95 percent non-condensing relative humidity around the extender connections.
- Routes through protective conduit wherever installation instructions require enclosure-to-enclosure cable protection.
- Observe the hazardous-location conditions stated for the carrier extender assembly.
- Use the referenced DeltaV Zone 2 installation documentation.
- Verify the installed product label before applying approval markings.