• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      sales1@apterpower.com
      +86 181 0690 9650
      Request a

      Fast Quote

      Manufacturers
      ALL MANUFACTURERS
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        Manufacturers
        sales1@apterpower.com +86 181 0690 9650
        Choose a manufacturer
        ALL MANUFACTURERS
        Ask our team:
        • Phone: +86 181 0690 9650
        • E-Mail sales1@apterpower.com

        • Lifecycle status

          Active / Available from OEM
          Apter Power supports A4 keying, termination-block and DeltaV version checks for VE4035S2B1.

        VE4035S2B1

        / 4.9
        1001 reviews ｜ Need a Specific Revision?
        Emerson VE4035S2B1 is an 8-channel 4–20 mA HART analog output card assembly with a redundant standard I/O termination block for DeltaV M-series Traditional I/O.
        In Stock
        Ships by Thursday, October 29
        Fast Shipping Available
        Get a quick price for VE4035S2B1
        Quantity
        *E-mail
        Company
        *Mobile
        *Content
        Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
        Get a Quote
        Warranty Policy
        We provide 1 year warranty for all remaining parts.
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        Return Notice
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
        Shipping Mode
        Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
        Parts Availability
        Apter Power offers a wide range of components, products and services related to industrial automation. We also supply new products from a variety of quality manufacturers.
        How to order
        We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online. If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.

        Technical specifications for VE4035S2B1

        • Manufacturer:
          Emerson
        • Part Number:
          VE4035S2B1
        • Product Family:
          DeltaV
        • Product Type:
          8-Channel 4-20 mA HART Analog Output Card with Redundant Standard I/O Termination Block
        • Stock:
          1
        • Number of Channels:
          8
        • Nominal Signal Range:
          4 to 20 mA
        • Full Signal Range:
          1 to 23 mA
        • Card Keying:
          A4
        • Isolation:
          1500 V DC factory test
        • LocalBus Current:
          100 mA typical; 150 mA maximum at 12 V DC
        • Field Circuit Power:
          300 mA maximum at 24 V DC (+/-10%)
        • Accuracy:
          0.25% of span over temperature range
        • Resolution:
          12-bit
        • Output Compliance:
          20 mA at 21.6 V DC supply into 700 ohms load
        • Calibration:
          Information stored on card
        • Optional Fuse:
          2.0 A
        • Minimum DeltaV Version:
          v10.3.1
        • Termination Block:
          Redundant standard I/O termination block
        • Operating Temperature:
          -40 to 70 °C
        • Storage Temperature:
          -40 to 85 °C
        • Relative Humidity:
          5 to 95%, non-condensing
        • Airborne Contaminants:
          ISA-S71.04-1985 Class G3; conformal coating
        • Protection Rating:
          IP20
        • Shock:
          10 g half-sine wave for 11 ms
        • Vibration:
          1 mm peak-to-peak from 5 to 16 Hz; 0.5 g from 16 to 150 Hz
        • System Controllers:
          MQ, MX, or PK controllers
        • Supported Carriers:
          M-series horizontal or VerticalPlus carriers
        • Estimated shipping dimensions:
          Product dimensions: 10.7x4.1x10.5cm (H x W x D).
        • Tariff Code:
          Please confirm the destination before shipping
        • Country of origin:
          USA
        • Place of shipment:
          Xiamen,Fujian,China
        By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

        More Information

        Overview Manuals Output Loop Fit Power & Isolation Redundancy Operation Product Applications

        Emerson VE4035S2B1 8-Channel 4-20 mA HART Analog Output Card with Redundant Standard I/O Termination Block Overview

        • Redundant termination: The order includes the redundant standard I/O termination block.
        • HART-enabled outputs: Device communication is carried on the 4–20 mA output loops.
        • Stored calibration: Calibration information is retained on the card for service continuity.

        VE4035S2B1 occupies the analog-output role within DeltaV M-series Traditional I/O, linking controller commands to field devices that accept current-loop signals.

        Its redundant termination arrangement separates this order code from standard single-card termination combinations and supports maintenance planning around paired I/O hardware.

        The installed carrier, field power and DeltaV software baseline define the service context for this configured assembly.

        Apter Power can coordinate official-document review, quotation details and sourcing support for VE4035S2B1.
        Emerson VE4035S2B1 8-Channel 4-20 mA HART Analog Output Card with Redundant Standard I/O Termination Block Manuals,Datasheets,Link
        Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
        • Signal window: Nominal output is 4–20 mA, with a full usable range of 1–23 mA.
        • Loop compliance: At 21.6 V DC, the output supports 20 mA through a 700 ohm load.
        • Conversion quality: Published performance is 0.25% of span accuracy with 12-bit resolution.
        • Service continuity: Calibration information is stored on the card rather than requiring a separate record.
        • Channel isolation: Every channel is optically isolated from the system and factory tested to 1500 V DC.
        • LocalBus demand: Current is 100 mA typical and 150 mA maximum at 12 V DC nominal.
        • Field supply: The card allows 300 mA maximum at 24 V DC with a ±10% supply tolerance.
        • Fuse option: The documented optional fuse rating is 2.0 A.
        • Shared card design: DeltaV redundant I/O uses the same Series 2 I/O cards used for non-redundant service.
        • Field wiring: Redundant terminal blocks retain the same field-wiring connections as simplex blocks.
        • System recognition: DeltaV automatically detects redundant I/O and represents the pair as one card in system tools.
        • Failure response: A primary-card failure triggers automatic switchover to the standby card with operator notification.
        • Analog control loops: Delivers current-loop commands to compatible field devices in DeltaV process-control applications.
        • HART output service: Supports field-device communication carried with the 4–20 mA output signal.
        • M-series installations: Fits Traditional I/O architectures using M-series horizontal or VerticalPlus carriers.
        • Redundant I/O duties: Serves output points engineered for a redundant card pair and standard I/O termination block.
        Description
        Emerson VE4035S2B1 is an eight-channel 4–20 mA HART analog output assembly for DeltaV M-series Traditional I/O. The order code includes the redundant standard I/O termination block and uses A4 card keying.

        Control-loop role is to convert controller commands into analog field outputs while carrying HART communication on the same loop wiring. Channel isolation and stored calibration support consistent service without changing the intended signal architecture.

        Order selection should distinguish this redundant standard-termination assembly from the standard, fused, and mass-termination alternatives listed for the same output-card family. Confirm the complete VE4035S2B1 code against the installed carrier and termination hardware.
        Alternative Names
        Emerson VE4035S2B1 DeltaV VE4035S2B1 VE4035S2B1 AO Card VE4035S2B1 HART AO VE4035S2B1 Redundant AO VE4035S2B1 M-series I/O
        Technical notes
        VE4035S2B1 requires DeltaV v10.3.1 or later. The main installation risk is mixing an earlier card option with this A4-keyed assembly: confirm the running DeltaV release, carrier keying, and redundant standard I/O termination block before removal. If the system is earlier, resolve the KJ3221X1-BA2 requirement before energizing the replacement.
        Exceptional Service

        Our Mission

        • 100% Satisfaction

          We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.

        • Trust Guaranteed

          Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.

        • Expertise

          Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

        FAQS

        The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
        VIEW ALL FAQS
        What output architecture does VE4035S2B1 provide?
        It provides eight 4–20 mA HART analog output channels with a redundant standard I/O termination block for DeltaV M-series Traditional I/O.
        Which software baseline is required before installing VE4035S2B1?
        Use DeltaV v10.3.1 or later. For an earlier software release, confirm the correct card option and upgrade path before changing hardware.
        What keying must be checked when installing VE4035S2B1?
        The card uses A4 keying. Verify the carrier position and termination hardware before insertion so the physical keying matches the intended assembly.
        How much loop load can VE4035S2B1 drive?
        At a 21.6 V DC supply, the published output compliance is 20 mA into a 700 ohm load. Account for field wiring and connected-device voltage drop.
        What field-power allowance should be reserved for VE4035S2B1?
        Allow up to 300 mA at 24 V DC, with a stated supply tolerance of plus or minus 10 percent, for the field circuit.
        How is calibration handled on VE4035S2B1?
        Calibration information is stored on the card. Preserve the system configuration and verify channel behavior after replacement before returning loops to service.
        Which controller and carrier environment supports VE4035S2B1?
        Emerson lists MQ, MX, or PK controllers with M-series horizontal or VerticalPlus carriers. Confirm the installed carrier and software baseline together.

        You May Also Like

        Product Browsing History