Fast Quote
Emerson PR9268-302-100 converts housing vibration into an electrical signal without an external excitation supply.
The horizontal configuration must be installed within the official angular limits so gravity acts on the spring-mass system as intended.
Confirm the mounting plane, signal polarity, cable route, electrical load, machine frequency range, environmental limits, and hazardous-area circuit before commissioning.
Emerson PR9268-302-100 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
PR9268-302-100 is an Emerson Epro electrodynamic velocity sensor for absolute vibration measurement in the horizontal direction.
The official PR9268/302-100 configuration provides an 8 m armored cable with an open cable end, 4...1000 Hz response, and 28.5 mV/(mm/s) nominal sensitivity.
Before installing or replacing PR9268-302-100, verify the horizontal mounting direction, allowed angular deviation, mounting surface, cable route, 35 mm bend radius, polarity, load, temperature, vibration amplitude, and hazardous-area circuit.





