Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 01984-4080-0001

  • EN-204-00-000 Servo Drive
  • 38B6041X152 I/P Converter Assembly Kit
  • 38B6041X082 Electro-Pneumatic I/P Converter Kit

All in stock · Add one and it is quoted together with the model, one shipping cost.

01984-4080-0001

Fisher 01984-4080-0001 is an RS3 discrete field interface module used between field wiring and the installed control-system I/O path.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 01984-4080-0001

01984-4080-0001Emerson RS3 Discrete Field Interface Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Emerson
Part Number
01984-4080-0001
Product Family
Fisher
Product Type
RS3 Discrete Field Interface Module
Stock
1
Weight
0.62 kg
Tariff Code
8537109090
Country of origin
UK
Place of shipment
Xiamen, Fujian, China

More information

  • RS3 discrete field-interface function
  • Rack-mounted module with local status indication
  • Full label and point-map verification before replacement

01984-4080-0001 links discrete field circuits to an established Rosemount RS3 I/O arrangement and provides local indication for maintenance checks.

Reliable replacement depends on preserving the installed point assignments, connector identity, revision and safe-state plan for every affected device.

After installation, test normal, alarm and trip states point by point with the process secured, then document authorization before restoring automatic operation.

Availability, condition, price, and shipping time for 01984-4080-0001 are confirmed during quotation.

Fisher 01984-4080-0001 RS3 Discrete Field Interface Module Manuals, Product Family, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Match complete assembly and board revision codes
  • Compare front hardware and rear connector keying
  • Retain rack, slot and cable identification
  • Preserve the approved discrete point map
  • Confirm normal, alarm and trip-state definitions
  • Recheck bypasses and interlocks before release
  • Exercise every affected field point
  • Compare LEDs, controller state and operator display
  • Verify final device response under controlled conditions
  • Maintenance of installed Rosemount RS3 discrete I/O
  • Restoration of an RS3 field-interface position
  • Like-for-like spare planning for legacy process-control racks

Description

01984-4080-0001 provides the discrete field-interface function in an installed Rosemount RS3 control architecture, with front indication supporting point and module-status checks.

The replacement decision must be based on the complete assembly label, board revision, assigned rack position and connector arrangement because the base part number does not capture every installed hardware detail.

Before removal, record the point map, normal and alarm states, field voltage source, interlocks and cabinet wiring. After installation, test each affected point from the field device through the operator display before returning the loop to automatic service.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Yuki
USA11 Emerson DeltaV models

11 Emerson DeltaV Models Secured and Inspected for an American Natural Gas Project

See how Apter Power secured 11 new and unused Emerson DeltaV models, supported independent powered inspection and delivered the order for an American natural gas project.

11DeltaV models secured
6 daysFull order prepared
“ Apter secured all our DeltaV models and supported independent inspection before we paid the balance. — Mohanad ”
Yuki · USA · May 2026
Read the full case study
Leonia
IndiaSiemens SIMATIC S7-400 PS 407 · 6ES7407-0DA01-0AA0

Siemens PS 407 Verified for an Indian Textile Plant

An Indian textile manufacturer asked Apter Power to verify Siemens SIMATIC S7-400 PS 407 module 6ES7407-0DA01-0AA0 by complete catalogue number, visible condition and packaging evidence before the next supply decision.

24/7Textile plant support
100%Inspected for Original & New product
“ Apter made our first overseas purchase of Siemens S7-1200 spares straightforward, with clear model confirmation and delivery arrangements. — Singh ”
Leonia · India · 9 October 2026
Read the full case study
Myrtle
Saudi ArabiaGE Fanuc IC693CPU364

Saudi Buyer Verifies GE IC693CPU364 On-Site

An Saudi project buyer with a China-based office visited three suppliers with an engineer after a previous purchase resulted in poor-quality goods that were not regarded as original. Following an on-site review of GE Fanuc IC693CPU364, IC693CPU372, IC693ALG391 and other stock in Xiamen, the customer selected IC693CPU364, placed an order and planned to test the module first.

3GE models reviewed
Trial OrderTest before wider purchase
“ Seeing the actual GE modules and stock in person gave us confidence to place our first test order. — Hassan ”
Myrtle · Saudi Arabia · October 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Which identifiers should be photographed before replacing Fisher 01984-4080-0001?

Photograph the complete assembly label, board revision, rack and slot, connector keying and all cable identifiers so the replacement can be checked against the installed hardware rather than the short part number alone.

What information should be exported before Fisher 01984-4080-0001 is removed?

Retain the discrete point map, normal-state definitions, alarm and trip logic, bypass status and cabinet drawings; these records are needed to prove that every signal returns to its intended function.

Can Fisher 01984-4080-0001 be exchanged while its rack remains energized?

Treat it as a power-down replacement unless the approved RS3 maintenance procedure for the exact rack explicitly permits otherwise; first place affected equipment in a controlled safe state.

What can cause correct LEDs but incorrect process behavior after replacing Fisher 01984-4080-0001?

A shifted connector, reversed field polarity, wrong common, mismatched revision or incorrect point mapping can leave local indication apparently normal while the control strategy receives the wrong state.

How should Fisher 01984-4080-0001 be acceptance-tested after installation?

Exercise every affected input or output from the field side and verify the module indication, controller state, operator display, alarm handling and final device response against the approved point list.

Which physical checks matter when buying Fisher 01984-4080-0001 as a spare?

Confirm the board outline, front hardware, rear connector, keying, ejector arrangement and the user-supplied 31 x 2.9 x 12.3 cm envelope against photographs of the removed module.

What evidence should accompany a quoted Fisher 01984-4080-0001?

Request clear label and connector photographs, the offered revision, inspection scope and test method so engineering can confirm identity before the shutdown window.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat