Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with PR6424/01 CS CON021

All in stock · Add one and it is quoted together with the model, one shipping cost.

PR6424/01 CS CON021

Emerson PR6424/01 CS CON021 16 mm eddy-current sensor and converter assembly for non-contact shaft displacement and position measurement.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for PR6424/01 CS CON021

PR6424/01 CS CON021Emerson 16 mm Eddy Current Sensor with CON021 Converter
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Emerson
Part Number
PR6424/01 CS CON021
Product Family
Epro
Product Type
16 mm Eddy Current Sensor with CON021 Converter
Stock
1
Weight
0.46 kg
Estimated shipping dimensions
17x3.7x21cm
Tariff Code
Please confirm the destination before shipping
Country of origin
Germany
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Non-contact measurement: Observes shaft movement without mechanical contact with the rotating surface.
  • Conditioned measuring chain: The PR6424 probe works with a CON021 converter to deliver a usable monitoring signal.
  • Large-machine geometry: The 16 mm sensor is intended for ferromagnetic shafts with sufficient target diameter.
The measuring chain supports radial or axial shaft-position tasks on critical rotating equipment.

A self-locking LEMO interface secures the sensor-to-converter connection while preserving the intended signal path.

Installation quality remains important because air gap, target surface, and cable routing influence the final measurement.

Apter Power supports Emerson PR6424/01 CS CON021 16 mm Eddy Current Sensor with CON021 Converter quotations, technical documents, and measuring-chain guidance.
Emerson PR6424/01 CS CON021 16 mm Eddy Current Sensor with CON021 Converter Manuals,Datasheets,Link
Important Notice: Manuals and supporting documents are provided for product review. Confirm the complete model and configuration before ordering.
  • Probe gap: Set the cold mechanical gap inside the converter's usable linear region before applying monitoring limits.
  • Target surface: Use a clean ferromagnetic shaft area with sufficient diameter and an uninterrupted sensing path.
  • Mounting stability: Keep the probe axis rigid so bracket movement does not appear as shaft displacement.
  • Cable path: Protect the sensor cable from sharp bends, hot surfaces, and high-energy conductors.
  • Radial movement: Use the conditioned output to trend shaft vibration or eccentricity at the monitored location.
  • Axial position: A suitable thrust target allows the same sensing principle to follow axial shaft position.
  • Reference baseline: Establish the healthy running signal after final mechanical installation and machine warm-up.
  • Speed observation: A key or defined target can provide a once-per-turn reference when the machine arrangement supports it.
  • Gap-voltage trend: A slow shift can indicate bracket movement, target change, or loss of the intended probe position.
  • Signal saturation: A rail-level output commonly points to excessive gap, damaged wiring, or an interrupted measuring chain.
  • Slow-roll comparison: Compare low-speed runout with operating-speed motion before treating every periodic signal as vibration.
  • Connector integrity: Check the LEMO interface and cable condition when the signal becomes intermittent or unusually noisy.
  • Steam and gas turbines: Supports shaft-position and dynamic-displacement monitoring on critical rotating trains.
  • Compressors: Provides non-contact shaft observation where casing-mounted vibration alone is insufficient.
  • Pumps: Helps trend shaft behavior at bearing or thrust-monitoring locations.
  • Fans and blowers: Enables gap-based motion monitoring on large ferromagnetic shafts.

Description

For critical rotating machinery, the PR6424/01 CS CON021 combines a 16 mm non-contact eddy-current probe with a CON021 converter. The measuring chain turns changes in probe-to-shaft distance into a conditioned signal for observing shaft position and dynamic displacement without touching the rotating surface.

The sensor head works with ferromagnetic steel targets and a shaft diameter of at least 80 mm. With PR6424/01 CS CON021, this geometry supports radial or axial measurements on large rotating assets while the self-locking LEMO connection keeps the probe and converter interface secure.

During commissioning, probe gap, target condition, cable routing, and the selected converter chain directly affect signal quality. A correctly installed PR6424/01 CS CON021 helps maintenance teams separate true shaft movement from installation-related offset before trend or protection limits are applied.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Yuki
Sudan9 ABB models · 20 components

After Six On-Site Reviews, a Sudanese Integrator Selects Apter Power for 20 Scarce ABB Components

After a two-to-three-year evaluation and five to six on-site visits, a Sudanese system integrator selected Apter Power from more than ten global suppliers for nine scarce ABB models and 20 components.

9Scarce ABB models
20Components supplied
“ This gave us the confidence to consolidate the order with one supplier. — Nadia ”
Yuki · Sudan · August 2025
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study
Leonia
Xiamen, ChinaAutomation spares

Bureau Veritas Audit Strengthens Trust for Global Buyers

A Bureau Veritas review checked Apter Power's business licence, registered address, office and selected export records, helping overseas buyers verify the company behind a quotation before ordering.

VerifiedBusiness identity checked
BV AuditCompany records reviewed
“ Trust starts with company details and trading records that buyers can verify. — Apter Power Team ”
Leonia · Xiamen, China · 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

How should the initial probe gap be set for PR6424/01 CS CON021 before commissioning?

Set the mechanical gap with the machine stationary, then confirm that the CON021 output sits within its linear working region. This leaves usable signal travel in both directions and reduces the chance of clipping during shaft movement.

What usually causes a rail-level signal from PR6424/01 CS CON021 during startup?

An excessive air gap, an interrupted cable path, a loose LEMO connection, or an unsuitable target can drive the converter output to its limit. Checking the static gap voltage first normally separates installation faults from real shaft motion.

Can PR6424/01 CS CON021 be applied to a shaft smaller than 80 mm?

The PR6424 geometry is specified for shafts of at least 80 mm. A smaller curved target can change the electromagnetic field and measurement linearity, so a smaller probe family is the safer engineering choice.

How can slow-roll runout be separated from vibration when using PR6424/01 CS CON021?

Capture a low-speed baseline after installation and compare it with the operating-speed waveform. A repeatable once-per-turn component present at slow roll is more likely related to target runout than changing machine vibration.

What changes when the cable or converter is changed in a PR6424/01 CS CON021 measuring chain?

The sensor, cable, and converter act as one calibrated chain. A different element can shift offset or scale, so the complete combination should be reviewed and the static gap response checked before returning the channel to service.

How should the cable for PR6424/01 CS CON021 be routed near motors or hot process equipment?

Keep the cable away from high-current conductors and heat sources, preserve the minimum bend radius, and protect the connector from mechanical load. These steps reduce noise and prevent cable damage from being mistaken for shaft movement.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

PR6424/010-140 CON021
The EPRO PR6424/010-010 CON021 Eddy Current Sensor operates within a voltage range of DC 10V to 30V, with 12V DC being the nominal voltage.
PR6423/003-030 CON021
Emerson EPRO PR6423/003-030 CON021 is an 8 mm eddy current sensor and signal converter assembly for non-contact turbomachinery measurement.
In stock
PR6423/002-131 CON021
The Emerson PR6423/002-131 CON021 is a non-contact eddy current displacement transducer designed for precise measurement of shaft position, vibration, and eccentricity. Its radiation-resistant construction makes it ideal for Zone 1 nuclear applications, turbomachinery, and critical pump or motor monitoring.
PR 6426/000-121 CON 031
Emerson PR 6426/000-121 CON 031 is a 32 mm eddy current sensor designed for precise static and dynamic distance measurements. It operates within an eddy current measuring chain system for rotating machinery monitoring.
PR9268/301-000
The Emerson PR9268/301-000 is an absolute vibration transducer that converts mechanical vibration into proportional voltage signals, enabling accurate condition monitoring in industrial environments up to 100°C.
PR6423/10R-111
Emerson PR6423/10R-111 is a reverse-mount PR 6423 8 mm eddy-current sensor with a 5 m unarmored cable without adapter plug and with open conductors for non-contact shaft measurement.
In stock
PR9350-02
Emerson PR9350-02 is a contact LVDT linear displacement transducer with a ±25 mm measuring range, 270 mV/V sensitivity and a three-pole Cannon connector.
In stock
MMS6312
EPRO MMS6312 is a dual-channel rotational-speed monitor for speed, key-phase and redundant speed functions in MMS 6000 systems.
In stock
PR6424/000-101 CON031
Emerson PR6424/000-101 CON031 is a 16 mm PR6424 eddy-current probe configuration paired with a CON031 signal converter for non-contact shaft displacement measurement. Use the complete order code when matching a replacement.
In stock
PR6424/000-000 CON021
Emerson PR6424/000-000 CON021 combines a 52.5 mm M18×1.5 unarmored 16 mm sensor, adapter, 4 m LEMO lead and CON021 converter.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat