• General Electric·
  • Fanuc IC693CPU364·
  • Inspect before you order·

Saudi Buyer Verifies GE IC693CPU364 On-Site

Saudi Buyer Verifies GE IC693CPU364 On-Site
Myrtle
GE Fanuc IC693CPU364
What the customer needed: an Saudi buyer with a China-based office needed dependable GE Fanuc Series 90-30 components for a government-related project after a previous purchase resulted in poor-quality goods that were not regarded as original. What we did: hosted the buyer and an engineer for an in-person supplier visit in Xiamen, presented the actual modules for inspection and discussed warranty, pricing and wider inventory. How it was verified: the engineer reviewed the physical units, labels, packaging and visible condition on site. What happened next: after comparing three suppliers and completing an internal review, the customer selected IC693CPU364, placed an order and planned to test the module first.
  • Project contextGovernment Project
  • CountrySaudi Arbia
  • Models reviewedIC693CPU364, IC693CPU372, IC693ALG391
  • Visit date26 October 2026

Customer and engineer visit date: 26 October 2026 · Category: Success Stories

3rdsupplier visited during the China sourcing trip
3named GE Fanuc models reviewed on site
1model ordered for initial testing
On siteengineer-led physical product review

The customer

The customer is an Saudi-based project buyer with an office in China. The China office coordinated the local supplier visits, while the accompanying engineer assessed whether the products met the technical purchasing requirements.

The sourcing team evaluated operating capability, visible inventory and engineering cooperation rather than comparing quotations alone.

The problem

A previous purchase had delivered very poor-quality goods that the customer did not regard as original. Online photographs and low prices were therefore no longer sufficient; the engineer needed to check product identity, packaging and visible condition before making a recommendation.

The first two suppliers offered lower prices but did not resolve the quality concerns. After seeing Apter Power's company scale, inventory presentation and product quality, the customer expressed satisfaction and moved the discussion to discount, warranty and future supply.

What was required

Customer requirement GE automation components for a government-related project
Product family GE Fanuc Series 90-30
Candidate models IC693CPU364, IC693CPU372 and IC693ALG391
Technical checks Full catalog number, product label, packaging and visible condition
Supplier assessment Company scale, stock visibility, engineering cooperation and future supply capability
Commercial review Price, available discount, warranty and other stocked brands

What Apter Power did

Placed physical stock on the inspection table. The customer did not have to rely on catalogue or sales images and could ask technical questions while looking at the actual units.


Separated technical checks from commercial discussion. The engineer assessed the products while the buyer confirmed discount, warranty and supply conditions, so price did not replace product verification.


Opened other stocked brands for review. After the GE checks, the customer continued looking at wider automation inventory for possible future requirements.

Verification evidence

The photos document the supplier meeting, physical modules and close-range product inspection.

  • Customer and engineer reviewing automation modules during an on-site supplier visit in Xiamen
  • Customer team comparing physical automation modules, labels and packaging
  • Automation modules and packaging arranged for physical inspection
Confirmed by the photographs Customer and engineer attendance, physical modules on the table and close-range product viewing
Not confirmed by the photographs Internal electrical condition, powered operation or complete functional-test results
Visit-record scope Physical units, labels, packaging and visible condition; no powered functional test is recorded on site

From supplier visit to an order for testing

  • On-site inspection became mandatoryThe previous quality problem led the customer to bring an engineer to China.
  • Three supplier visits were completedThe first two stops did not meet expectations; Apter Power was the third.
  • Technical and commercial questions were separatedThe engineer checked products while the buyer discussed warranty, discount and available brands.
  • Information was taken back for reviewThe customer evaluated the observations and commercial conditions internally.
  • The first order model was confirmedIC693CPU364 was ordered for initial testing after the internal review.

Product verification views

Three verification views of a GE Fanuc IC693CPU364 module showing the housing, interfaces and identification label

Three views used for product review

This image set brings together the overall housing, connector and interface layout, and identification label of the GE Fanuc IC693CPU364. The three views help buyers compare the visible unit with the requested model before dispatch.
  • 01Overall housing and visible condition
  • 02Connector and interface layout
  • 03Model label and identification details

What the customer said

“After the third supplier visit, the accessible stock, company scale and visible product condition gave us enough information to proceed with the first test order.”

— Project buyer, government-related industrial project, Saudi Arabia

In the words of the person who handled it

“The customer had already visited two suppliers and did not want another decision based only on price or photographs. We prepared the actual GE Fanuc modules, supported the engineer's physical review and kept the warranty and discount discussion separate. After the customer completed its internal review, IC693CPU364 was confirmed for initial testing.”

— Leonia, Marketing Director, Apter Power

The result

After the internal review, the customer selected IC693CPU364 from the candidate products, placed an order and planned to test that module first. IC693CPU372 and IC693ALG391 were not included in the confirmed order.

The decision was based on company scale, accessible physical stock, visible product quality and the engineer's on-site judgement rather than the lowest quotation. The available information ends at the order-for-testing stage and does not include installation or commissioning.

Parts involved

GE Fanuc IC693CPU364

Series 90-30 CPU module selected after the on-site inspection and internal review, then ordered for initial testing.

Ask about this part

IC693CPU372 and IC693ALG391 were also reviewed during the visit; the confirmed order covers IC693CPU364.

Who wrote this, and who checked it

Frequently asked about on-site inspection

What should be confirmed before an inspection visit?

Confirm the full catalog numbers, quantities to be viewed, label or revision details to check so the correct units can be prepared.

What can a visual inspection confirm?

It can confirm that the physical unit is present, the full catalog number and label match, and the packaging or exterior shows no obvious issue.

Can several models and brands be reviewed in one visit?

Yes, when the list is supplied in advance. This team reviewed three GE Fanuc models and then looked at other stocked brands, allowing the engineer to prioritise the checks.

When should discount and warranty be confirmed?

They should be written into the formal quotation after model, quantity and product condition are clear. An on-site discussion can clarify requirements, but the final terms should remain in the agreed written quote.

How should functional testing be arranged?

We do not provide on-site powered functional testing at our facility, as full validation requires the buyer's target PLC rack and system setup. During the visit, checks are limited to physical and label verification, and functional testing is carried out by the buyer on their own system after delivery—just as this customer did by ordering one IC693CPU364 first to test on site.

Can't find the part number you need?

We source thousands of unlisted, obsolete and hard-to-find parts. Enter the part number below and our sourcing team will check availability.

Mon–Fri 09:00–18:00 GMT+8 · Typical response within 2 business hours

Need Help with a Similar Sourcing Challenge?

Send us the part number, quantity and delivery country. Our team will review your requirements and confirm:

  • ✓ Product condition and availability
  • ✓ Lead time and applicable warranty
  • ✓ Shipping options to your destination

For revision, date code or documentation requirements, please include them with your enquiry.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China
Apter Power team verifying industrial automation parts
Straight away
+86 15359408275 Call or WhatsApp. You reach a person, not a queue.
Within minutes
Live chat Message the team during working hours.
Within 2 working hours
Request a quote Send the form and an account manager picks it up.
ISO 9001:2015 certified

Our sourcing, order review and quality-control processes are managed under a certified quality management system.

View certificate

More Sourcing Case Studies

Explore how Apter Power supports industrial parts sourcing through product identification, verification, documentation and delivery coordination.