Features:
- Relay interface: groups multiple discrete control circuits on one panel.
- 24 V DC control: uses the documented cabinet control-supply arrangement.
- Interposing contacts: separate controller commands from switched field circuits.
The field-load voltage is defined by the fitted relay contacts and cabinet circuit, not by the control marking alone.
Connector keying and terminal numbering preserve the original Ovation harness arrangement.
Each load should remain within the relay and cabinet protection ratings.
Apter Power can provide quotations and Ovation cabinet-interface review for the Emerson R-S108V01-16-24VDC-C5-1 24 V DC Relay Panel.
Emerson R-S108V01-16-24VDC-C5-1 24 V DC Relay Panel Manuals,Datasheets,Link
Important Notice: Verify the complete catalog number, document revision and installed-system configuration before use.
- Interposing function: separates controller output commands from the field circuits switched by the fitted relay contacts.
- Channel boundary: usable relay circuits depend on the installed panel population and terminal schedule.
- Load rating: field voltage and current are governed by the fitted contact ratings rather than by the 24 V DC control marking.
- Control-side meaning: the 24 V DC designation applies to the relay-control or coil circuit, not automatically to the switched field load.
- Cabinet protection: polarity, fuse protection and supply grouping must follow the installed cabinet design.
- Return paths: control commons and returns should remain consistent with the original output architecture and terminal schedule.
- Circuit layout: controller and field sides use the fitted panel arrangement.
- Harness keying: connector position preserves the cabinet cable path.
- Terminal schedule: numbering follows the original panel drawing.
- Load boundary: field wiring remains subject to relay contact ratings.
- Ovation interposing relays: separates controller outputs from field loads.
- Discrete commands: groups 24 V DC control circuits in cabinets.
- Load interface: provides contacts where controller outputs cannot drive directly.
- Field devices: serves contactors, solenoids or alarms within documented ratings.