Features:
- 12-30 VDC documented operating input
- 30 W high-capacity regulated output
- 7 A current limit on the +5 VDC output
GE identifies IC693PWR331 as the high-capacity 24 VDC power supply for Series 90-30 baseplates, with 18 to 30 VDC required during startup.
The module distributes its 30 W rating among +5 VDC logic, isolated +24 VDC loads, and +24 VDC relay circuits subject to the published individual limits.
Commissioning requires correct polarity, suitable conductor sizing, verified source voltage, total-load calculation, ambient derating review, and a compatible baseplate arrangement.
Apter Power can quote the GE IC693PWR331 24 VDC High Capacity Power Supply and check source and output loading.
GE IC693PWR331 24 VDC High Capacity Power Supply Manuals, Datasheets, Links
GE IC693PWR331 24 VDC High Capacity Power Supply Specs
General
- Manufacturer GE
- Model IC693PWR331
- Condition New and Original
- Product Family Series 90-30 PLC
- Startup: The supply starts with 18 to 30 VDC applied.
- Operation: The documented running range is 12 to 30 VDC.
- Total power: Combined regulated output capacity is 30 W.
- Input demand: Maximum published input power is 50 W.
- Current limit: The +5 VDC output current limit is 7 A.
- Overvoltage: Shutdown is triggered between 6.4 and 7.0 V on the +5 VDC output.
- Ride-through: Minimum input-power ride-through is 10 ms.
- Derating: Output loading must be reduced above 50 °C.
- Position: Use the leftmost Series 90-30 baseplate slot.
- Polarity: Verify DC polarity before connecting the supply.
- Loading: Calculate each output and the 30 W combined demand.
- Service: De-energize the baseplate before installing IC693PWR331.