Features:
- Machine Edition View and Logic Developer PC development plus runtime capability.
- Licensed capacity for as many as 8000 device I/O points.
- Compact 12.1-inch touch platform for project creation and local operation.
Development and runtime functions reside on one station, reducing the need to transfer every project change from a separate engineering computer.
The SVGA touch panel, front control keys, and soft keyboard provide a self-contained interface for supported configuration and operating tasks.
Two independent Ethernet adapters connect engineering and control networks, while the serial and expansion interfaces retain access to legacy equipment.
Pricing requests and official documentation for the General Electric IC5002TAW1000 Machine Edition Development Panel PC can be handled by Apter Power.
General Electric IC5002TAW1000 12.1-Inch Machine Edition Development and Runtime Panel PC Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IC5002TAW1000 Engineering Capability
- Unified environment: Machine Edition hosts the supported View and Logic PC tools in one interface.
- Development use: The station can create and modify supported project configurations.
- Runtime use: The same license includes execution capability for the completed project.
- Local interface: Touch controls and the soft keyboard support panel-side engineering tasks.
IC5002TAW1000 Point Accounting
- Licensed total: The order configuration supports up to 8000 I/O points.
- Device points: Values collected from PLCs, CNCs, and connected devices count toward the limit.
- Virtual points: Internal CIMPLICITY-only points are not normally counted as device I/O.
- Project scope: Point use should be reviewed before restoring or migrating an existing project.
IC5002TAW1000 File Movement
- Optical media: The CD-ROM reads installation and archive discs.
- Network copy: Project files can move through either configured Ethernet interface.
- USB access: Front and side USB ports support approved service media.
- Archive discipline: A current project backup is retained before recovery or major software work.
IC5002TAW1000 Commissioning Sequence
- Windows account: Initial setup establishes the required Windows 2000 login.
- Network identity: TCP/IP, workgroup, and domain information are entered for the target site.
- Touch calibration: The operator surface is calibrated after its COM4 driver is installed.
- Application launch: Machine Edition starts only after hardware drivers and system settings are confirmed.