Features:
- Provides a local display and keypad for Series One controller work.
- Uses a keylock to control access to programming functions.
- Supports direct rack mounting or temporary use with an extender cable.
The IC610PRG105 gives maintenance personnel a dedicated interface at the controller, keeping program work at the installed rack rather than requiring a separate cabinet device.
Its compact form sits over the CPU and power-supply area, where snap-lock retention keeps the programmer aligned during use.
A separately ordered mounting assembly can place the programmer on a panel, console, or tabletop when direct mounting is not practical.
Apter Power can prepare a quotation and provide available OEM documentation for the General Electric IC610PRG105 Programmer with Keylock.
General Electric IC610PRG105 Programmer with Keylock Manuals, Datasheets, Links
Contact Apter Power if you need an available OEM publication for the exact IC610PRG105 configuration.
Choosing a supported programmer position
- Direct placement: Set the programmer over the CPU and power-supply assembly.
- Retention: Align the housing before engaging the power-supply snap locks.
- Remote placement: Use IC610PRG190 for an outside-panel, console, or tabletop position.
- Separate accessory: Order the CPU/programmer cable separately when the mounting assembly is used.
Orienting the programmer cable correctly
- CPU interface: Connect the cable to the controller's 26-pin receptacle.
- Programmer end: Place the push-tab connector at the programmer.
- Keying: Follow the keyed shape at both ends instead of forcing engagement.
- Ribbon reference: Keep the red cable edge facing upward at both connectors.
Protecting the controller during installation
- Power state: Do not connect or disconnect the programmer while AC power is applied.
- Housing alignment: Match the programmer to the outside dimensions of the power supply.
- Insertion: Press gently until the snap locks engage.
- Cable condition: Inspect the keyed plugs and ribbon before returning the assembly to service.
Using the extender cable without adding avoidable noise
- Temporary use: Treat the extender as a service connection rather than a permanent installation.
- Noise immunity: Remove the extender after the required programming work is complete.
- Direct option: Mount the programmer on the CPU when a remote operating position is unnecessary.
- Routing: Keep the temporary ribbon away from cabinet conductors that can introduce electrical interference.