Features:
- Sixteen-channel termination: Provides field connections for 16 single-ended analog input channels.
- Compact architecture: Uses a 6-inch non-redundant IOTA footprint with one IOM position.
- Module choice: Supports the documented HART or non-HART Series 8 analog input IOM.
8C-TAIXA1 51307127-175 is the termination assembly beneath a compatible Honeywell Series 8 analog input module.
It carries field wiring and cabinet power; the installed IOM performs signal conversion and channel processing.
Replacement planning should preserve the IOTA/IOM pairing, terminal map, single-module architecture, keying, and cabinet interface.
Apter Power supports 8C-TAIXA1 51307127-175 enquiries with sourcing, documentation, IOM pairing review, and Series 8 configuration guidance.
Honeywell 8C-TAIXA1 51307127-175 Analog Input IOTA Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Field termination: Lands 16 single-ended analog current loops at the Series 8 interface.
- Mechanical format: The coated 6-inch IOTA provides one nonredundant module position.
- IOM support: It is documented for both HART and non-HART 16-channel analog input IOMs.
- Power path: Distributes the cabinet 24 VDC supply through the documented Series 8 arrangement.
- Channel capacity: The IOTA supports 16 single-ended analog input channels.
- Signal path: Compatible IOMs accept 4–20 mA from two-wire or self-powered transmitters.
- Record control: Preserve terminal numbers, field tags, ranges, and control-strategy assignments before removal.
- Wiring boundary: Field power, shield, grounding, and common connections remain part of the installed cabinet design.
- HART option: 8C-PAIHA1 is the documented 16-channel HART analog input IOM.
- Non-HART option: 8C-PAINA1 is the documented 16-channel non-HART analog input IOM.
- Redundancy boundary: 8C-TAIXB1 is the separate redundant 12-inch IOTA; do not substitute it without cabinet review.
- Fit control: Verify IOM keying, coating, firmware, cabinet power, and terminal layout before installation.
- Process measurement: Terminates 4–20 mA transmitter and sensor loops assigned to the compatible Series 8 IOM.
- Cabinet maintenance: Keeps field wiring fixed when the removable IOM is serviced.
- HART selection: Supports either HART or non-HART acquisition when paired with the documented IOM.
- Migration records: Preserves the relationship among field terminals, IOM type, cabinet power, and control strategy.