Features:
- Provides sixteen analog-input points for 4–20 mA and 10 V process signals.
- Uses the non-isolated IAH161 channel architecture documented for this module type.
- Carries the TK coated configuration for the Series C hardware family.
The ordering configuration combines the TK coated construction with the sixteen-point IAH161 analog-input function.
It gathers continuous transmitter and voltage signals for controller processing in multi-loop process installations.
Selection should preserve the existing termination, field reference, signal scaling and enclosure environmental requirements.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Honeywell TK-IAH161:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Concentrates 4–20 mA measurements from process transmitters into a Series C controller rack.
- Accepts supported voltage signals where the project uses the documented 10 V analog-input range.
- Fits coated control cabinets that require a sixteen-channel analog acquisition module.
- The module belongs to Honeywell Series C I/O and must match the installed controller hardware.
- Field wiring and the termination assembly must correspond to the sixteen-point analog-input arrangement.
- The non-isolated channel reference must agree with the grounding design used by the connected transmitters.
- Sixteen channels collect continuous process measurements for controller monitoring and control logic.
- The documented signal formats cover 4–20 mA loops and compatible 10 V field inputs.
- Engineering scaling must convert each acquired signal into the correct process value before use.
- The TK ordering prefix identifies the conformally coated version of the Series C module.
- Coated construction should be retained where the cabinet specification requires protected electronics.
- Overall environmental suitability remains dependent on the complete enclosure, ventilation and approved system installation.