Features:
- High-Density I/O — Consolidates 32 safety-related digital points within one module.
- Platform Integration — Operates as part of the Honeywell Safety Manager SC architecture.
- Deployment Flexibility — Accommodates supported single-module and redundant cabinet designs.
Honeywell FC-PDIO01 51454927-176 handles 32 digital points at a nominal 24 VDC, helping reduce module count and conserve space in safety-control cabinets.
The module connects field-level digital signals to the control system through an approved IOTA and C-Series carrier, creating an organized interface between field wiring and safety logic.
Engineers can incorporate the unit into supported single or redundant arrangements according to project availability requirements. Hardware revision, firmware, software release, wiring, and certification constraints must be verified before commissioning.
The FC-PDIO01 51454927-176 Honeywell Safety Digital IO Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Honeywell FC-PDIO01 51454927-176 Safety Digital IO Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Honeywell FC-PDIO01 51454927-176 Safety Digital IO Module Specs
General
- Manufacturer Honeywell
- Model FC-PDIO01 51454927-176
- Condition New Original ready stock
- Product Family FC-PDIO01, FC-PUIO01, FC-RUSIO-3224
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Install FC-PDIO01 only with the Honeywell IOTA and carrier specified for the selected redundant or non-redundant architecture.
- Engineer the module within Safety Manager SC using the software release and certified configuration applicable to the installed system.
- Confirm controller, IOTA, cabinet, firmware, and hardware-revision compatibility before replacing an existing module.
- Validate channel configuration, field wiring, diagnostics, and safety functions through the site’s approved commissioning procedure.
- Safety Manager SC is TÜV-certified for safety applications up to SIL 3.
- Final compliance depends on the complete system configuration, not on the I/O module alone.
- Hazardous-area use must be confirmed against the FC-PDIO01 revision, associated IOTA, enclosure, and applicable certificate.
- IEC 61508/61511 claims should follow the project safety manual, proof-test requirements, and certified application constraints.
- Emergency Shutdown systems requiring safety-related digital field signals.
- Fire and Gas systems connecting compatible detectors, switches, alarms, and shutdown devices.
- Burner Management applications implemented within an approved Safety Manager SC architecture.
- HIPS and Critical Control functions where the complete design satisfies the required safety integrity level.