Features:
- Forty TMR 24 Vdc outputs arranged in five isolated power groups
- Automatic open-circuit, short-circuit, stuck-on, and stuck-off diagnostics
- 1 ms Sequence of Events resolution with online replacement support
The
T8451 order code selects the 40-channel Trusted digital output module for 24 Vdc field circuits. Its five-group layout separates sets of eight outputs and provides defined limits for group loading at the specified ambient temperatures.
Three switch paths drive every output and the field termination circuitry applies the voted result to the load. The module reports measured current, voltage, commanded state, and wiring condition to the Trusted processor for safety-related output control.
Before commissioning, check the T8100 or T8300 slot, field-supply segregation, load current and capacitance, cable or FTA arrangement, and cooling. Intrinsically safe applications require approved external barrier devices because the module is not a direct IS field interface.
Quotation, official documentation, and configuration support for the ICS Triplex T8451 Trusted TMR 24 Vdc Digital Output Module - 40 Channel are available from Apter Power.
ICS Triplex T8451 Trusted TMR 24 Vdc Digital Output Module - 40 Channel Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ICS Triplex T8451 Trusted TMR 24 Vdc Digital Output Module - 40 Channel Specs
General
- Manufacturer ICS Triplex
- Model T8451
- Condition New Original ready stock
- Product Family Trusted 8000 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Channel implementation
- Triplicated Paths: Each output is controlled through three independent switch channels and voted at the field interface.
- Line Monitoring: Open- and short-circuit checks use measured current and voltage to supervise field wiring.
- Fault Protection: Electronic latching short-circuit protection is provided per output channel.
- Status Indication: Front-panel indicators show module state, output status, and field-wiring alarms.
Continuous supervision
- Backplane Supply Voltage: T8451 is documented with backplane supply voltage of 20 Vdc to 32 Vdc.
- Backplane Power: T8451 is documented with backplane power of 27 W.
- Field Supply Voltage: T8451 is documented with field supply voltage of 18 Vdc to 32 Vdc.
- Output Channels: T8451 is documented with output channels of 40.
Output installation checks
- Supply rails: Verify the 20-32 Vdc backplane supply and the separate 18-32 Vdc field supply before enabling T8451 outputs.
- Channel groups: Route the 40 outputs as five documented groups of eight channels and preserve the field-power grouping.
- Load review: Confirm each connected load remains within the 2 A channel rating and satisfies the specified 50 mA minimum load.
- Termination check: Inspect field wiring, return paths, and output status indications before applying commands to the module.