- 2.8 A rms rated output with 5.6 A rms peak output for approximately 5 seconds
- 1.7 kVA rated connected load for S1 operation
- 75 W internal continuous ballast power with 3.2 kW pulse power for up to 1 second
DIGIFAS 7202 is a Kollmorgen digital servo amplifier in the digifas 7200 series for driving 6SM synchronous servomotors.
The standard unit accepts an analog speed setpoint and provides incremental position output, while CONNECT versions add PLC I/O, pulse/direction, PROFIBUS-DP, or CAN interfaces.
Before installation or replacement, verify the complete unit designation, installed CONNECT module or option, 6SM motor and resolver data, saved BS7200 parameters, wiring, cabinet ventilation, and auxiliary supply.
Availability, condition, price, and shipping time for DIGIFAS 7202 are confirmed during quotation.
Kollmorgen DIGIFAS 7202 Digital Servo Amplifier Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The standard unit derives motor-shaft position from 14-bit cyclically absolute resolver data
- The ROD output provides A and B pulse trains offset by 90° plus an adjustable zero pulse
- Selectable incremental-output resolutions are 500, 512, 1000, or 1024 pulses per revolution
- BS7200 reads the amplifier parameters and supports offline editing of saved data sets
- Parameter sets can be saved to disk, while permanent changes are written from RAM to EEPROM
- Service functions provide constant-speed, constant-current, and reversing modes for controller optimization
- The floating BTB contact opens and the output stage switches off when the amplifier reports a fault
- Green and red LEDs distinguish ready status from a released BTB contact and fault condition
- Fault monitoring covers the resolver, DC-link voltage, output stage, heat sink, internal temperature, and motor temperature
- Driving 6SM synchronous servomotors in industrial single-axis systems with DIGIFAS 7202
- Multi-axis servo systems using DIGIFAS 7202 amplifiers with permitted DC-link and ballast-energy sharing
- Constant-speed drive applications using the DIGIFAS 7202 speed-steadiness function to improve smooth running