Features:
- Converts a standard ±10V analog input into precise digital torque and velocity control for brushless motors, compatible with legacy motion controllers.
- Accepts resolver or incremental encoder signals, supporting a wide range of legacy Kollmorgen motor models without requiring external feedback converters.
- Features a slim panel-mount chassis that allows high-density installation in control cabinets, saving valuable panel space.
The 13K-0119 is optimized for systems where a motion controller (e.g., PMAC, Delta Tau, or Galil) provides ±10V analog command signals. This architecture was standard before industrial Ethernet protocols like EtherCAT became widespread. The drive accepts a high-resolution analog voltage (e.g., +8V equals 3000 RPM) and converts it into precise PWM switching for the motor. It includes customizable acceleration and deceleration limits, which smooth out aggressive commands from the controller, protecting mechanical transmission components from shock loads.
Unlike simple drives that only accept a tachometer or Hall sensors, the 13K-0119 supports both resolver and incremental encoder feedback. Resolvers are robust and ideal for harsh environments (oil, dirt, vibration), while incremental encoders provide higher resolution for precision positioning. The drive uses the feedback signal for electronic commutation of the brushless motor, eliminating the need for Hall sensors. However, the drive is factory-configured for a specific motor type.
The 13K-0119 features a slim, booksize chassis that can be mounted side-by-side on a DIN rail or directly to a panel. This design allows high-density installations, critical in control cabinets where space is limited. The aluminum base acts as a heatsink; for intermittent duty cycles, no external cooling fan is required. When multiple drives are installed with zero spacing, they effectively share the thermal load.
The 13K-0119 KOLLMORGEN Controller may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL)by the manufacturer (OEM).
KOLLMORGEN 13K-0119 Controller Manuals,
Datasheets,Drivers,Link
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
KOLLMORGEN 13K-0119 Controller Specs
General
- Manufacturer KOLLMORGEN
- Model 13K-0119
- Condition New Original ready stock
- Product Family
13K-0117,13K-0115
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
- Multi-Axis Packaging & Converting: Coordinates complex, continuous movements like electronic camming, flying cut-offs, and rotary knife applications.
- Semiconductor & Wafer Processing: Manages sub-micron precision positioning on multi-axis pick-and-place systems and linear gantry stages.
- Medical Robotic Automation: Installed in diagnostic imaging machinery and surgical beds requiring smooth torque output and zero-cogging motion profiles.
- Automated Guided Vehicles (AGVs) & Warehouse Robotics: Drives decentralized, low-voltage multi-axis navigation controls for precise warehouse sortation.
- Humidity & Atmosphere Limits: 5% to 85% non-condensing relative humidity. Must be installed inside an IP54-rated industrial cabinet to prevent dust, oil mist, or conductive metallic particulate contamination.
- Vibration Resistance: Designed to survive low-frequency industrial resonances, complying with IEC 60068-2-6 standard thresholds for cabinet-mounted hardware.
- Real-Time Diagnostics Integration: Automatically mirrors local monitoring variables—such as DC bus voltage, internal module temperature, and encoder signal parity—directly into the Kollmorgen WorkBench visualization toolkit.
- Soft-PLC Programmability: Executes standard machine control sequences using an IEC 61131-3 soft PLC engine, allowing deployment of all five standard programming languages (including Structured Text and Ladder Diagram).
- Non-Volatile Memory Safeguard: Automatically logs critical machine state parameters and error codes to an onboard 32kB non-volatile storage block to prevent scrap material tracking issues if a sudden power line failure occurs.