Features:
- Three 8 A outputs: the equal motor channels define the 3x20 current class.
- DC-fed architecture: the KSP receives power from the KR C4 intermediate circuit.
- Axis-group control: three assigned motor paths are handled within one servo pack.
This article performs the servo-amplifier role for a three-axis group rather than the incoming mains-conversion role of a KPP.
Its 8 A outputs form the lowest current class among the supplied KSP 3x20, 3x40, and 3x64 examples.
Module identity, current class, cable order, and axis allocation should travel together through purchase, installation, and commissioning.
Apter Power can review 00-198-266 3x20 identity, three-channel label evidence, condition, and quotation needs.
KUKA 00-198-266 KSP 600-3x20 Servo Pack Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Three equivalent AC outputs serve three assigned motor circuits.
- Each channel is marked 8 A within a 0–400/480 V range.
- The output frequency range extends from 0 to 500 Hz with 12/14 kW label points.
- The KSP receives 565/675 V DC from the cabinet intermediate circuit.
- A 25 A DC path is carried through the module for the drive-system architecture.
- Motor control is delivered on the three AC outputs rather than through a direct mains input.
- The 3x20 designation separates this 8 A class from the higher-current 3x40 and 3x64 packs.
- Three cable identifiers must remain linked to their original robot-axis assignments.
- Article 00198266 and hardware version 2A provide receiving-inspection traceability for the photographed unit.
- Control a documented group of three lower-current manipulator axes in a KR C4 drive cabinet.
- Replace a failed 3x20 servo-amplifier stage while preserving the original cable and axis order.
- Maintain an exact-article spare for installed robot controllers using article 00198266.