Features:
- One integrated axis path: the label specifies a single 17 A AC output.
- Combined power role: mains conversion and DC-link supply share the module.
- Exact 1x40 identity: article 00198260 separates this variant from multi-channel KPP units.
The module is suited to a cabinet layout that needs a KPP power stage plus one assigned amplifier channel.
Its single output reaches 0–400/480 V at up to 500 Hz within the marked 12/14 kW operating points.
Article number, output count, current class, hardware evidence, and axis wiring should be checked as one identity set.
Apter Power can review 00-198-260 article identity, one-channel output evidence, condition, and sourcing requirements.
KUKA 00-198-260 KPP 600-20-1x40 Drive Power Supply Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- One three-phase AC output is provided for an assigned motor path.
- The channel is marked 17 A across the stated 0–400/480 V range.
- Output frequency is identified from 0 to 500 Hz, with 12/14 kW voltage-dependent ratings.
- A 400/480 V three-phase input supplies the module at 50/60 Hz.
- The 565/675 V DC link remains available at a marked 25 A.
- The integrated AC channel converts part of that drive power for one axis connection.
- The 1x40 suffix fixes the intended single-channel arrangement.
- Article 00198260 and hardware version 2A should be captured from the received label.
- Connector placement and the assigned motor path must agree with the approved KR C4 configuration.
- Service a KR C4 cabinet that combines its drive power supply with one integrated axis-amplifier channel.
- Restore a single motor path while retaining the cabinet’s documented 17 A output architecture.
- Support planned spare holding where article 00198260 is listed in the controller bill of materials.