Features:
- Two matched channels: both AC outputs are marked at 17 A.
- Integrated KPP design: the power-supply and paired amplifier roles share one article.
- 2x40 configuration: the suffix defines a dual motor-path cabinet layout.
Two separate AC output paths allow this KPP to serve a paired-axis allocation inside the KR C4 drive cabinet.
The common DC-link section remains rated at 25 A while the two motor channels share the same electrical class.
Successful service depends on keeping channel identity and cable routing intact, not merely replacing the enclosure.
Apter Power can review 00-198-263 dual-channel identity, nameplate evidence, condition, and procurement details.
KUKA 00-198-263 KPP 600-20-2x40 Drive Power Supply Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Two three-phase AC outputs are built into the power-pack assembly.
- Each path is marked 17 A and 0–400/480 V at up to 500 Hz.
- The pair shares the 12/14 kW voltage-dependent output designation on the label.
- The two outputs carry the same published electrical rating rather than different current classes.
- Each motor harness still retains its own physical connector and axis assignment.
- Channel labels and cabinet records prevent the two paths from being interchanged during installation.
- Article 00198263 is the primary order identity for this 2x40 configuration.
- The photographed unit records hardware version 2A and a German country-of-origin marking.
- Post-installation checks should evaluate the DC link and each AC path separately before automatic operation.
- Maintain a KR C4 cabinet that assigns two manipulator motor paths to an integrated KPP amplifier section.
- Restore paired-axis drive availability while retaining the documented 17 A channel class.
- Prepare an exact spare for controller layouts whose bill of materials lists article 00198263.