Features:
- A fan-free IPC427C runs the preinstalled WinCC V7.0 SP2 Update 1 client environment.
- A Celeron M processor, 1 GB DDR3 memory, and 4 GB CompactFlash form the documented client configuration.
- Two Ethernet ports, four USB 2.0 ports, one RS232 COM port, and 24 V DC supply serve the deployed station.
Siemens 6ES7675-1DA20-6AX0 combines embedded IPC hardware and licensed WinCC client runtime in one orderable bundle.
CompactFlash storage on 6ES7675-1DA20-6AX0 carries the embedded operating system, runtime installation, and transferred project.
Network and local interfaces on 6ES7675-1DA20-6AX0 separate plant communication from service and peripheral connections.
The Siemens 6ES7675-1DA20-6AX0 SIMATIC IPC427C WinCC V7.0 Client Bundle may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7675-1DA20-6AX0 SIMATIC IPC427C WinCC V7.0 Client Bundle Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Hardware and Runtime Scope
- IPC hardware: The fan-free IPC427C supplies the processing, interfaces, and 24 V DC power input.
- Client software: WinCC V7.0 SP2 including Update 1 Runtime is preinstalled for the client role.
- License scope: The documented runtime license covers 128 process tags.
- Storage role: The 4 GB CompactFlash card carries the embedded system, runtime, and project files.
Processor, Memory and Cooling
- Processor path: The 1.2 GHz Celeron M executes the embedded operating system and WinCC client tasks.
- Working memory: One gigabyte of DDR3 RAM supports the running client and communications processes.
- Fan-free design: Heat leaves the compact enclosure without a rotating cooling fan.
- Mounting options: The IPC427C can be installed on a DIN rail, wall, or upright front position within the documented limits.
Network and Local Connections
- Ethernet links: Two RJ45 connections carry configured plant-network and client/server traffic.
- USB ports: Four USB 2.0 ports connect supported local service or peripheral devices.
- Serial channel: The RS232 COM port provides one documented serial connection path.
- Display output: The DVI-I interface connects the selected local monitor or flat-panel display.
Project Transfer and Recovery
- Client project: The engineering project must identify this station as the intended WinCC client.
- Network settings: Server names, addresses, and Ethernet paths must match the deployed client/server design.
- Write filter: Flash protection is enabled only after required applications and project files are transferred.
- Recovery copy: A verified CompactFlash backup preserves the licensed runtime environment and station configuration.