Features:
- Combines sixteen Gigabit copper ports with eight 1/10 Gbit/s SFP+ slots.
- Accepts redundant 24 V DC feeds and reports faults through a signaling contact.
- Manages PROFINET, VLAN, redundancy, diagnostics and secured access services.
The XC316-8 forwards mixed copper and optical traffic as a managed Layer 2 industrial switch.
Local console access and removable CLP storage keep device management separate from production data paths.
Rail and wall mounting options place the fanless IP20 unit inside an industrial enclosure.
The Siemens 6GK5324-8TS00-2AC2 SCALANCE XC316-8 Managed Industrial Ethernet Switch may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5324-8TS00-2AC2 SCALANCE XC316-8 Managed Industrial Ethernet Switch Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Copper, optical and service connections
- RJ45 bank: Sixteen secured copper ports negotiate 10, 100 or 1000 Mbit/s.
- SFP+ bank: Eight slots accept supported 1 or 10 Gbit/s transceivers.
- Console: USB Type B provides a local serial management path through an adapter.
- Signal contact: A separate terminal reports configured faults without consuming a network port.
Alternative paths through a managed topology
- Power feed: Two terminal inputs accept a redundant 24 V DC supply arrangement.
- Ring recovery: MRP and HRP provide managed ring behavior for supported topologies.
- Parallel networks: PRP and HSR support duplicate data paths without relying on one cable route.
- Spanning tree: RSTP, RSTP+ and MSTP control looped Layer 2 links.
Configuration and diagnostic access
- Web and CLI: Browser and command-line interfaces expose device settings.
- SNMP and RMON: Network managers can collect status, traffic and event information.
- Port analysis: Mirroring, packet-size statistics and error counters isolate a problem path.
- PROFINET: The switch acts as an IO device and supplies PROFINET diagnostic data.
Clock distribution and protected administration
- Time clients: NTP and SNTP align the switch clock with a network time source.
- Precision forwarding: IEEE 1588 v2 messages pass through with transparent-clock support.
- Secured sessions: SSH and SSL protect supported management connections.
- Port admission: IEEE 802.1X and traffic limiters restrict unauthorized or excessive traffic.