Features:
- Six RJ45 Fast Ethernet ports connect local copper devices to one multimode optical uplink.
- Managed functions cover VLANs, diagnostics, PROFINET integration, and documented ring redundancy.
- C-PLUG storage preserves the configured device parameters for controlled replacement.
Copper traffic entering Siemens 6GK5206-1BB10-2AA3 can be forwarded to the BFOC fiber segment without converting the connected device protocol.
Configuration channels on 6GK5206-1BB10-2AA3 define the switching and diagnostic behavior that the C-PLUG can retain.
The two supply paths of 6GK5206-1BB10-2AA3 power the same switch while exposing a feed loss through configured monitoring.
The Siemens 6GK5206-1BB10-2AA3 SCALANCE X206-1 Managed Industrial Ethernet Switch may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5206-1BB10-2AA3 SCALANCE X206-1 Managed Industrial Ethernet Switch Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Media Roles and Link Limits
- RJ45 group: Six autosensing interfaces connect 10 or 100 Mbit/s copper devices.
- BFOC path: One 100 Mbit/s port connects the managed switch to multimode glass fiber.
- Fiber reach: The documented multimode optical path can extend to 5 km when its link budget is satisfied.
- Media boundary: Copper cable rules and optical attenuation must be verified independently.
Alternate Path Control
- MRP role: The switch can participate in a Media Redundancy Protocol ring.
- High-speed mode: The documented High-Speed Redundancy mechanism provides the alternative ring behavior.
- Ring ports: Only interfaces assigned to the selected ring function form the monitored path.
- Fault transition: A detected ring-link change causes traffic to use the available alternate route.
Configuration and Diagnostics
- Web access: Browser-based management exposes device, port, VLAN, and diagnostic settings.
- CLI access: The command-line interface provides a separate configuration path.
- SNMP: Network management can read status and receive supported diagnostic information.
- PROFINET: As a Class B device, the switch reports its documented PROFINET IO diagnostics.
Stored Parameters and Supply Continuity
- C-PLUG: The removable storage medium retains the assigned device configuration.
- Replacement workflow: A suitable replacement can read the stored parameters instead of being configured from zero.
- Dual input: Two terminal feeds accept the redundant 24 V DC supply.
- Fault output: The floating contact can report a configured supply, device, or link fault.